garage door opener

I followed all the steps in the manual to get my garage door opener to work , but no luck. any suggestions out there? Xk8 1994
 
P.S. thanks for the tip on my window closing issue.
jaggy

I remember having a little trouble when we did it, it took liek 20 minuets to program the garage.

I don't remember specifically what we needed to do to make it work, all I remember is that we weren't doing exactly what the manual said.
This will sound like bad advice but just try reading the instruction more closely and doing exactly what it shows, or have someone else do what they think it says to do.

My dad spent liek 15 minutes reading what the owner manual said and he couldn't get it, so then i read the instructions and got it on my first try i believe. 

SORRY i cant be more helpful

This one is actually easy. The manual confuses you and tries to tell you about using the programming button on the actual garage door motor/panel. All you have to do is begin the programming of the button on the jag panel, as the manual says, and activate (&hold) the remote next to it, and it will recognize the correct frequency, if after 5-10 seconds, that is. Hope that helps!