facia panels/dash - RESOLVED
#1
facia panels/dash - RESOLVED
good morning forum browsers can any one tell me why on a 1984 ser3 sov why the lower dash panels came out in metal to look like wood and where could I get some from or can I use wooden ones.
Last edited by GGG; 07-30-2014 at 05:12 PM. Reason: add RESOLVED to thread title
#2
Join Date: Mar 2008
Location: Pacific Northwest USA
Posts: 24,739
Received 10,749 Likes
on
7,100 Posts
The following users liked this post:
oldjagowner (07-29-2014)
#3
#4
The following users liked this post:
oldjagowner (07-30-2014)
#5
Join Date: Mar 2008
Location: Pacific Northwest USA
Posts: 24,739
Received 10,749 Likes
on
7,100 Posts
The computer and the four push-push switches are all in the same panel.....one piece.
Surprised to hear that your '84 has the wood panel at the console/gearshift....as that's typically seen on '86-87 cars.
Anyhow, I would try British Autowood or Paul's Jaguar for replacements. Both USA outfits but I'm sure they'd ship overseas.
Or Ebay for good used ones, perhaps?
Cheers
DD
The following users liked this post:
oldjagowner (07-30-2014)
#6
The following 2 users liked this post by GGG:
Doug (07-29-2014),
oldjagowner (07-30-2014)
#7
An alternative supplier is MYRTLE PRODUCTIONS ( Daimler Jaguar XJ6/12 Series 3 Walnut Veneer Clock Panel [DAIMLER JAGUAR XJ6 / 12 SERIES 3] - £125.00 : Myrtle Productions, fine wood car interiors and luxury steering wheels ) in the UK:
Graham
Graham
The following users liked this post:
oldjagowner (07-30-2014)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)