Mark this thread as Unsold
FS[NorthWest]: WaterDragon / Muppet Labs ProM MAF, intake, water injection +extras for sale
#1
WaterDragon / Muppet Labs ProM MAF, intake, water injection +extras for sale
Up for sale here is a complete intake kit:
(original cost) not counting shipping and R&D
($395) 92mm ProM maf already wired. existing wires are labeled to attach to stock connector wires. You keep both connectors so you can go back to stock in 5 minutes.
($80) IAT sensor plumbed into intake
($$Custom) 4" to true 3.5" intake. Hood still closes easily with 3.5" 90 smooth sweep bend into the TB. There is no better flowing XJR intake on the planet
($100) Catch can
Heat shield-so it is a cold air only intake
($376 new) Snow Stage II Water/Meth injection running at 375 ml/minute
I would like to sell the above as one sale for $600, since it works best this way. This intake paired with the water injection before the TB will gain you no less than 2 psi of boost, more likely closer to +3 psi.
I'm going to try to sell the above as a complete set for 1 week before parting it out
First $600 shipped takes all of the above. If interested I can throw in a ported set of intake manifolds too. PM me if interested and it is yours.
I also have a +1.5-1.7 lb aluminum upper pulley available for $150 delivered. the surface is grippier than most aluminum and it will not slip.
I am going to keep the maxbore TB and ported elbow and ported 5th gen blower on the car since it is running perfectly, so if/when I sell it all will be perfect for the next owner.
If anyone wants to buy the whole thing for $600 and then part it out themselves, I am happy to do it that way too
(original cost) not counting shipping and R&D
($395) 92mm ProM maf already wired. existing wires are labeled to attach to stock connector wires. You keep both connectors so you can go back to stock in 5 minutes.
($80) IAT sensor plumbed into intake
($$Custom) 4" to true 3.5" intake. Hood still closes easily with 3.5" 90 smooth sweep bend into the TB. There is no better flowing XJR intake on the planet
($100) Catch can
Heat shield-so it is a cold air only intake
($376 new) Snow Stage II Water/Meth injection running at 375 ml/minute
I would like to sell the above as one sale for $600, since it works best this way. This intake paired with the water injection before the TB will gain you no less than 2 psi of boost, more likely closer to +3 psi.
I'm going to try to sell the above as a complete set for 1 week before parting it out
First $600 shipped takes all of the above. If interested I can throw in a ported set of intake manifolds too. PM me if interested and it is yours.
I also have a +1.5-1.7 lb aluminum upper pulley available for $150 delivered. the surface is grippier than most aluminum and it will not slip.
I am going to keep the maxbore TB and ported elbow and ported 5th gen blower on the car since it is running perfectly, so if/when I sell it all will be perfect for the next owner.
If anyone wants to buy the whole thing for $600 and then part it out themselves, I am happy to do it that way too
Last edited by WaterDragon; 04-21-2014 at 10:34 PM.
#5
I'll claim dibs on the intake and possibly the Pro M(if Michael doesn't buy it), if it gets to parting out.
Thank you sir!
Chris
Thank you sir!
Chris
#7
OK,
I'll let this go a week, then I'll be happy to part it out, you guys have dibs.
OR someone can buy the whole thing and they can part it out.
I'll let this go a week, then I'll be happy to part it out, you guys have dibs.
OR someone can buy the whole thing and they can part it out.
Last edited by WaterDragon; 04-21-2014 at 11:11 PM.
The following users liked this post:
Badbenz94 (04-22-2014)
Trending Topics
#11
It is an Eaton still right? The pulley should be the same and if it for some reason did not fit, I'd give a full refund. I'm not sure if it can use a stock belt or not, best to post and ask some other STR owner to confirm.
Thread
Thread Starter
Forum
Replies
Last Post
xjrjag
XJ XJ8 / XJR ( X308 )
18
09-27-2015 01:53 AM
rusty37
XJ6 & XJ12 Series I, II & III
7
09-18-2015 10:03 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)