someone/shop in north jersey-greater nyc area to to program key
#1
someone/shop in north jersey-greater nyc area to to program key
on the assumption I can get my own key cut,,,,is there anyone out there who can rx...someone/shop who has the necessary software to program another key/to my xj8 2000 long?
i only have one black key and need a duplicate.Trying to avoid paying 400 bucks or more at a dealer to get this done. Any thoughts, suggestions or referrals...thanks again
i only have one black key and need a duplicate.Trying to avoid paying 400 bucks or more at a dealer to get this done. Any thoughts, suggestions or referrals...thanks again
#2
#3
kEY
I had a key cut and programmed to the car by a local locksmith. I suggest you
call around and ask. Don't get confused by the fact that there are two types of programming commonly confused with each other. They are:
1-Programming the key to the car.
2-Programming the remote key FOB to work with the car. This is the one that
will flatten your wallet at the dealer. I did see a dealer program an unprogrammed FOB with a working one in the ignition key slot a long time ago.
Unfortunately I can not reproduce the sequence.
Good Luck and Blue Skies!!!!
call around and ask. Don't get confused by the fact that there are two types of programming commonly confused with each other. They are:
1-Programming the key to the car.
2-Programming the remote key FOB to work with the car. This is the one that
will flatten your wallet at the dealer. I did see a dealer program an unprogrammed FOB with a working one in the ignition key slot a long time ago.
Unfortunately I can not reproduce the sequence.
Good Luck and Blue Skies!!!!
The following users liked this post:
jagjunky (11-18-2013)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)