F-Type Cyclones on X350 - No Go
#1
F-Type Cyclones on X350 - No Go
Well, I had an opportunity to pick up a nice set of F-Type Cyclone rims locally. Was hoping these would fit on the X350, but after doing a bit of 'mock up' today, this looks like a little too much 'poke', so am going to scrap the idea.
I knew it was a gamble and was a bit of a stretch, but I wanted to give it a go anyway. I was hoping to do 285 30 20 on the rear, but after seeing this on-car and doing some measurement 'in plane' it doesn't appear so...
I am posting this so others who have this idea will visualize the fitment challenge(s).
I have been running the 2014 XJ Aleutian rim/tires with a 10" rear, but 10.5" just too much...
These Cyclones will be posted in the sale/trade section if you have the inclination.
Thank you-
Mag
I knew it was a gamble and was a bit of a stretch, but I wanted to give it a go anyway. I was hoping to do 285 30 20 on the rear, but after seeing this on-car and doing some measurement 'in plane' it doesn't appear so...
I am posting this so others who have this idea will visualize the fitment challenge(s).
I have been running the 2014 XJ Aleutian rim/tires with a 10" rear, but 10.5" just too much...
These Cyclones will be posted in the sale/trade section if you have the inclination.
Thank you-
Mag
Last edited by magmedia; 06-28-2015 at 03:48 PM.
The following users liked this post:
Panthro (01-19-2016)
Thread
Thread Starter
Forum
Replies
Last Post
DFW
F-Type ( X152 )
15
10-01-2015 07:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)