Brake buster
Posts: 71
Score: 0
Joined: 3/4/2008
Status: offline
|
this week i have been refurbishing the throttle bodies, as they were totally gummed up with coke and oil , and i had new pivot bushes to install for the linkage to
the bodies were taken off and fully dismantled and cleaned up, i did this with the aid of carb cleaner and a scotch pad , ordered up new gaskets and waited for em to turn up, three days later i was putting it all back together
checked everything was working ok and there was no serious wear to any of the parts , i then bolted it back to the plenum chamber
once all back together i did the other side and took the picture, lol
BB 8)
< Message edited by Brake buster -- 3/6/2008 11:09:24 AM >
|
Printable Version
V12 TB's refurb/rebuild - 
