porschegonzo
Posts: 23
Score: 0
Joined: 5/29/2008
Status: offline
|
ive been taking things apart in an attempt to install the ignition switch into the back of the lock cylinder. i see the small screw you were referring to, but getting a screw driver, even a very small one in there to turn it is proving to be very difficult. i looked and there looks to be just 3 8mm bolts that hold the lock clinder to the side of the steering colum. is this what most people losen to drop the assembly down to get to the screw?
|
Printable Version
RE: new to the jaguar forums and new 85 XJS Owner - 
