Jaguar
 

X350 ''''04 Factory cell phone

  Printable Version
Jaguar Forum >> Jaguar Models >> Jaguar XJ8 >> X350 ''''04 Factory cell phone Page: [1]
Login
Message << Older Topic   Newer Topic >>
X350 ''''04 Factory cell phone - 6/10/2008 8:37:13 AM   
timfountain

 

Posts: 9
Joined: 5/31/2008
Status: offline
Ok,
So I have a totally useless Cingular/AT&T Motorola V60i TDMA cell phone in my car. In searching around, I found that both Mercedes and BMW have a Bluetooth puck that is the shape of the V60i that slides right in, allowing a Bluetooth equipped phone to pair with the adapter (theoretically). These modules run $200 to $400. Before I buy one, any thoughts or success stories here?
The modules are:-
  • BMW BTUM Bluetooth Upgrade Module kit CPT 9000
  • Mercedes Bluetooth Module B67875856

 
Thanks

- Tim

< Message edited by timfountain -- 6/25/2008 7:37:02 PM >
Post #: 1
RE: X350 ''04 Factory cell phone - 6/25/2008 7:36:03 PM   
timfountain

 

Posts: 9
Joined: 5/31/2008
Status: offline
Quick update - CPT9000 BTUM doesn''t work!

Darn, the car gives a communication error message. CPT does pair with my BB8820 fine, when I try to make a call the nav screen briefly flashes up with the dialing screen then gives a phone error. No audio in or out from the cars microphone or speakers. When you first start the car the phone screen says the phone is off, when you try to turn it on it says communication error.

Why does this have to be so hard????

- Tim

< Message edited by timfountain -- 6/25/2008 7:38:24 PM >

(in reply to timfountain)
Post #: 2
RE: X350 ''''04 Factory cell phone - 6/26/2008 7:52:40 PM   
FactoryJaguarTech



Posts: 2972
Joined: 1/6/2008
Status: offline
FactoryJaguarTech's photo gallery
Change your system to bluetooth. All you need is the bluetooth module. You already have the PSE module in the trunk. Basically, you pull the rear vents out of the center console. You will see the connector there that the phone is plugged into. Unplug it and plug in the bluetooth upgrade module. You can then pair your phone to the car via bluetooth and it will all work just like the motorola one did.

One thing though....you need to download the blackberry bluetooth pairing helper to your blackberry. Then run it to pair the phone.


_____________________________

If it ain't broke, don't fix it!!!

(in reply to timfountain)
Post #: 3
RE: X350 ''''''''04 Factory cell phone - 6/28/2008 8:08:27 AM   
timfountain

 

Posts: 9
Joined: 5/31/2008
Status: offline
Factorytech. Thanks for the update. I went to the local dealer to see what hey recommend. It seems like the phone interface I have is too old and I need to update the whole module before I can add the bluetooth interface. Can you help me source the latest PSE module?

Thanks

- Tim

(in reply to FactoryJaguarTech)
Post #: 4
RE: X350 ''''''''''''''''04 Factory cell phone - 6/28/2008 10:31:20 AM   
FactoryJaguarTech



Posts: 2972
Joined: 1/6/2008
Status: offline
FactoryJaguarTech's photo gallery
That is BS.
I have installed many of them. All you need to buy is the Bluetooth upgrade module. The PSE module in the trunk is purely for storing the phonebook etc. The BTUM is for your phone pairing. It takes the place of the Motorola V60 interface. Plugs right into the same connector.
There was someone on here that found the modules cheap. I will see if I can find the post.


_____________________________

If it ain't broke, don't fix it!!!

(in reply to timfountain)
Post #: 5
RE: X350 ''''''''''''''''''''''''''''''''04 Factory cel... - 6/29/2008 9:32:42 AM   
timfountain

 

Posts: 9
Joined: 5/31/2008
Status: offline
Thanks for the update. Any information would be useful. I have a copy of the original upgrade procedures from Jaguar (the dealership gave me a copy) and it clearly states that the older units for the V60 need a new PSE, so I do not know what to do! I''d love for it to just be a plau in BT module. The bulletin I have a copy of is dated 05/05, number X-37USA page 5.

Conversion from V60 phone system.

When upgrading a V60 installation, it is necessary to remove the handset cradle, all other components can remain installed.

PSE Module - required if earlier part number installed 1x    C2C 25674 (this has been superceeded by C2C34515)
Bluetooth module                                                1x    C2C 28506 (this has been superceeded by C2C39062)
Clip                                                                  2x    C2C 22169
Screw 4 Zone A/C cars only                                  1x    C2C 22168
Screw 2 Zone A/C cars only                                  1x    XR8 33494
Handbook
English                                                              JMM 10 31 99 551
French                                                              JMM 11 31 99 551
Spanish                                                             JMM 15 31 99 551

(in reply to FactoryJaguarTech)
Post #: 6
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
 
Jaguar Forum >> Jaguar Models >> Jaguar XJ8
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
jimc645627
aquill15013
bigdreams053740
factoryjagua2972
cadillac2242
racerx821974
jag_genius1671
ken@britishp1371
dennis1343
h20boy985

New Vendors
K&N Engineering, Inc.

Add Jaguar Forums to your favorites Contact Us | Advertising | Partners | Archive | About Us | Links | Legal | Privacy Policy | © Jaguar Forums.com
Ford Mustang | Honda CBR | Harley Davidson |

Jaguar Forums .com is not affiliated with or endorsed by Ford Motor Company.