anyone here debadge their f-type?
#241
#242
The following users liked this post:
Uncle Fishbits (09-12-2018)
#243
Join Date: Dec 2017
Location: The Netherlands Central Highlands - Veluwe-
Posts: 1,236
Received 261 Likes
on
196 Posts
It is a lot better then the factory layout, but I never understood why they didn't do it like this, exept that its far to bizzy with this specific licens plate as it has so many texts on it already...
So I grabbed an image from the web with a more quiet license plate.. Dealer says JLR sees leaper & text as the logo, so inseperable..
So I grabbed an image from the web with a more quiet license plate.. Dealer says JLR sees leaper & text as the logo, so inseperable..
Last edited by Dan_NL; 09-12-2018 at 03:18 AM.
#244
#245
Join Date: Feb 2014
Location: Adelaide, South Australia
Posts: 8,302
Received 3,124 Likes
on
2,304 Posts
The following 2 users liked this post by OzXFR:
Burt Gummer (09-22-2018),
David Meier (10-15-2019)
#246
The following users liked this post:
Burt Gummer (09-22-2018)
#248
Dan_NL: Thank you. The car had those wheels as an option and, with the other black accents, looked great on the showroom floor. Your wheels look very classy and fit our car well. Lots of options from the factory and I've seen a few posts here with stunning aftermarket wheels. Might be worth considering if you desire a change when new tire time comes around.
#249
Join Date: Dec 2017
Location: The Netherlands Central Highlands - Veluwe-
Posts: 1,236
Received 261 Likes
on
196 Posts
I discovered I can get the much praised wheels way cheaper here due to much lower transport cost.. ..
I will only change the wheels if they suffer from damage for some reason, like a pothole.
Tried to add this pic with my post above, but no joy.. .. so here it is;
The rays of light are the way it was then, no filter or editing, else then the license plate. Probably because the sun shines through the top of the trees, its works as a grid...
It does look "brilliant"...
I will only change the wheels if they suffer from damage for some reason, like a pothole.
Tried to add this pic with my post above, but no joy.. .. so here it is;
The rays of light are the way it was then, no filter or editing, else then the license plate. Probably because the sun shines through the top of the trees, its works as a grid...
It does look "brilliant"...
Last edited by Dan_NL; 09-12-2018 at 07:28 AM. Reason: arranging text better
#253
The following users liked this post:
KVO (09-12-2018)
#255
If it were mine, I'd black out chrome badging, delete the R badge, and ceramic coat the exhaust tips black... Just sayin...
#257
#258
Yes, they're the OE parts I picked up at the dealer which come with the template as well to ensure correct spacing. The curvature of the bumper doesn't pose an issue at all since the letters are quite small and the sponginess of the tape compensates for any curvature. I can take a few shots once I wash the car as it's been raining non-stop here in Austin.
Subtle, and it really looks like it is stock.
Always wondered a bit JLR's idea to put brand and logo on the spoiler, since when applied, both are upside-down...
Like this way more than the original badge layout.
#259
#260
Join Date: Dec 2017
Location: The Netherlands Central Highlands - Veluwe-
Posts: 1,236
Received 261 Likes
on
196 Posts
White or black interior ; V6 ?
Last edited by Dan_NL; 09-22-2018 at 12:46 PM. Reason: didn't notice he already wrote his config down