Thread Display Options...?
 

Hallo all,

there are 3 modes to view a thread: Linear/Threaded/Hybrid.
By entering the:
user CP
Settings & Options
Thread Display Options
(the help page, shows these 3 modes)
you should be in the thread and on the RH side top bar you find the "Display Mode"

I can not find the "Display Mode"...

Please for help/
Thank you.

Panagiotis,

1. click on User CP button on the black menu bar (circled in red)

2. click on Edit Options in the list on the left (arrowed in red)

Attachment 85789

3. scroll down the Edit Options to Thread Display Options

Attachment 85790

4. in Thread Display Mode, choose the required display (arrowed in red)

Attachment 85791

5. finally, scroll down to the bottom of the page and click on Save Changes

Attachment 85792

The Reset Fields button at the bottom puts all settings back to default.

Graham

Hi Graham,

Thanks, all above is done up several times, stucks to point #4 of yours, where the system gives me the oportunity for Linear (oldest/newest) only...

Panagiotis,

Same for me!

I've asked forum owners (Internet Brands) if Hybrid is missing or if it should not be shown as an option in the Help page.

Graham

Hi Graham,

I miss not only the Hybrid made, but also the Threaded mode...

Panagiotis,

Forum owner, Internet Brands have confirmed the only order options are Linear Mode - Oldest First and Linear Mode - Newest First.

The Help page has been revised to show this:

https://www.jaguarforums.com/forum/a...p;d=1401299777


Sorry but Hybrid is not available.

Graham

Hello Graham,

Thanks for your efforts/reply, pity, hybrid mode could be very useful for navigation.
Strange how this is not noticed so far..