Hi,have xj8. 350 and have clipped kerb with off side rear wheel bending tie rod ,have replaced with new from dealer and is a more sturdy part so must of been poor design in first place,so now need to get wheel aligned is it possible to get done by independent or is it a main dealer job,thanks

 

Welcome to the forum Scott2gogo,

Good to have you here with us at Jaguar forums.

Sorry to hear about the damage to your XJ8. Follow this link https://www.jaguarforums.com/forum/xj-x350-x358-xj6-xj8-xjr-28/ to the X350 section for help, advice and information. Members there with the same model should be able to advise on options for the alignment.

Remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.

You can also visit the UK Region section by following this link UK - Jaguar Forums - Jaguar Enthusiasts Forum to find other members in this country.

Enjoy the forum.

Graham

 

Welcome to the forum Scott,

Good to have you with us.
Enjoy the forum.

If you haven't already done so you should add your car details to your signature to help others to help you.

 

welcome to the forum

 

Hey there and welcome aboard....... good to have you here with us here at Jaguarforums

Any useful site information you may need such as how to post pictures, edit signatures, add videos, using the search facility etc, can be found here within the following link
Helpful_information

Please also take the time to check out the regional section for your area!
There are lots of members local to you with the same interests with info on local dealers and possible meets.
Regional - Jaguar Forums - Jaguar Enthusiasts Forum

I've manually upgraded you to Full forum access so you can better view the site and all its features
Please Jump on in and enjoy the site.................