89 xjs convertible parting out
 

89xjs convertible v12 for parts body parts, glass all invery good condition with no visible damage. Previous owner had it towed to shop and refused to repair. I bought it for parts for my 89 xjs. forget the interior, except for dash parts. will post photos later. No reasonable offers refused and you pay shipping and packing cost. This is not buyer beware. I am retired military. Let me know what you might need and I'll let you know when I might be able to do it for you !!
ken in wv

Hi Ken,
I know you said forget the interior, but do you have the steering column with key and the roof switch. I would take both exterior door handles.
Thanks Matt

Matt,
I don't want to take the steering column out yet as I plan to "steer" the car in and out of the garage this summer... But the door handles should not be a problem.... Do you need the linkage for both and I imagine you want the key (I would have to have another made) or find out if I can remove the ignition key lock and still have steering control.
Ken

I need a drivers side rear view mirror (LHD) if you'd part that out.
I had a fight with a deer and the mirror lost!

Pete Mohr
Pittsboro, NC

Interested in the passenger side rear quarter window motor.

Thanks!
David

David,
Make a reasonable offer... I will bench test before sending to make certain it's working. Do you want the mechanism also?
Probably $10.00 for shipping should work.
Ken

Hi Ken,
I'm still very interested in the door handles and the chrome trim on the front bumper (All three pieces) Are you willing to part with the steering column yet? Or maybe just the ignition and key.
Thanks Matt

Matt,
When do you need the parts... Currently I am working on rebuilding the rear end out of my 89. I see no problems with the handles or bumper stuff... Need to know exactly what parts you need of the bumper so will send you a photo... Could you give me your email address.... If I could steer the car in and out of the garage without the column I could give that now, but don't think so.... Will check on the ignition. Yes I do have a key..
ken

Hi Ken

Check your PM box.

Thanks

David

Hi ken,
Please email me directly
Mattrinehard@yahoo.com
I would like all the parts as soon as possible. I'm in middleboro ma 02346
Thanks
Matt

Parts
 

Do you still have parts you are selling? I need a harness that runs on top of the radiator support and the washer fill.

Hi there,
Wondering which ski slope you have. I am interested in the pattern on the right of the photo in the link.
http://www.myrtleltd.com/includes/te...-ski-slope.jpg
I don't need it to be in any type of good condition as I'm planning to refinish it myself.
Let me know which version you have.
Thanks.

If it's the marelli ignition I'm in need of the complete ignition harness from passenger footwell to the front 2 amplifiers

Thx.

If it's the marelli ignition I'm in need of the complete ignition harness from passenger footwell to the front 2 amplifiers

Thx.

I do have the one you want.... send me your email. mine is kenatofc@gmail.com and I will send you a photo. Any reasonable offer plus shipping accepted.
ken

If you have the part # it might be easier for me to figure out how to remove....
kenatofc@gmail.com

need the spare tire holdown bolt and nut.


ukester@tds.net

I need the lower chin spoiler or air dam under the front lower pan I believe it is abs or hard rubber

Need ABS valve block for 90 XJ-S
 

Hi Ken,
I am looking for an ABS valve block for my 90 XJ-S. I believe they started ABS in 89. It has three hard brake lines coming from it right under the brake fluid reservoir. Any idea if yours works? Feel free to email me back at djinaustin@gmail.com.

Thanks,
David

Shifter
 

I could use the shifter itself and the wiring that goes to it (unplugs from the rest of the car). Don't need the shifter cover or cruise switch, and don't need the shifter cable. Please give me a price including shipping to California, zip 95008