Jaguar Forums - Jaguar Enthusiasts Forum - Search Results

 
Search: Posts Made By: NBCat
Showing results 1 to 25 of 500
Search took 0.08 seconds.
06-10-2019, 11:01 PM
Replies: 15
Views: 982
Posted By NBCat

Kane Emery, as Karl suggested in post 11 above,...

Kane Emery, as Karl suggested in post 11 above, use a pressure tester after a cold soak, preferably overnight, to determine the source of the leak. Pump the pressure tester to 1 bar and see if it...
06-10-2019, 10:36 PM
Replies: 26
Views: 1,594
Posted By NBCat

Aloha Bob, the 4.2 litre cars are easier to work...

Aloha Bob, the 4.2 litre cars are easier to work on and maintain.

Look for worn suspension parts; noisy VVT on cold start; gearbox service has been completed. The ZF 6HP26/28 gearbox must be...
06-09-2019, 02:58 PM
Replies: 10
Views: 433
Posted By NBCat

There are many on these forums using the Elm327...

There are many on these forums using the Elm327 device with good results:
...
06-08-2019, 06:16 PM
Replies: 28
Views: 26,883
Posted By NBCat

It may be easier for you to remove the belt...

It may be easier for you to remove the belt tensioner to allow the belt to be removed and the new one fitted.
06-08-2019, 06:12 PM
Replies: 5
Views: 596
Posted By NBCat

You may want to also post your enquiry in the...

You may want to also post your enquiry in the UK/Eire section as well as most members on this forum are from North America. Jaguar never offered a diesel variant of the X200 in North America.
06-08-2019, 06:09 PM
Replies: 9
Views: 331
Posted By NBCat

DO NOT rely on the instrument cluster temperature...

DO NOT rely on the instrument cluster temperature gauge to determine if the engine is overheating! The gauge doesn't change between about 96 C and 128 C, which is not going to help you if you're in...
06-08-2019, 06:01 PM
Replies: 10
Views: 433
Posted By NBCat

Someone is going to need to check the usual...

Someone is going to need to check the usual failure points for vacuum leaks on Bank 2, which is the LH side of the vehicle when viewed from the driving position. Since only one bank is setting a DTC...
05-27-2019, 10:38 AM
Replies: 5
Views: 844
Posted By NBCat

Here is a link to the AJ Engine Course that...

Here is a link to the AJ Engine Course that includes the procedures and torque values:

https://www.dropbox.com/s/vqpy3bbjzd9t0w8/engine_repair_course_168.pdf?dl=0
05-22-2019, 11:49 AM
Replies: 12
Views: 1,533
Posted By NBCat

In my experience, the OEM seals and gaskets are...

In my experience, the OEM seals and gaskets are superior to the aftermarket items. Replace the spark plug boss seals as well so oil doesn't find it's way into the spark plug wells and cause a coil...
Forum: XJ ( X351 )
05-17-2019, 09:29 AM
Replies: 38
Views: 1,827
Posted By NBCat

+1 on cleaning the area around the inlet manifold...

+1 on cleaning the area around the inlet manifold prior to removing it.

Also, be sure to block off the inlet ports on the heads after the inlet manifold is removed so no foreign matter goes into...
05-15-2019, 11:26 AM
Replies: 15
Views: 759
Posted By NBCat

Unless its been replaced very recently, change...

Unless its been replaced very recently, change the water outlet assembly as well whilst the inlet manifold is removed as the bolts into the block are easier to access.
05-14-2019, 04:08 PM
Replies: 19
Views: 697
Posted By NBCat

Jomiltom Por favor, para obtener una respuesta...

Jomiltom Por favor, para obtener una respuesta sobre el indicador de intervalo de servicio, escriba su pregunta en inglés. La gente en este sitio web no hablan español
05-14-2019, 03:58 PM
Replies: 4
Views: 372
Posted By NBCat

How many kilometres/miles on the vehicle...

How many kilometres/miles on the vehicle currently? Has any other work been carried out recently on the engine or gearbox?

Begin by checking the gearbox fluid level. If fluid level is correct, it...
05-14-2019, 03:54 PM
Replies: 26
Views: 2,163
Posted By NBCat

Difficult to tell from the photo, but it appears...

Difficult to tell from the photo, but it appears something was bouncing around in that cylinder and eventually damaged one of the exhaust valves upon exiting.

What was the condition of the spark...
05-14-2019, 02:43 PM
Replies: 37
Views: 3,805
Posted By NBCat

There has been an issue with the clutch assembly...

There has been an issue with the clutch assembly on early X152s, which was covered under the vehicle warranty. If the gear lever is difficult to move in and out of gear, most likely the driven plate...
05-14-2019, 08:48 AM
Replies: 14
Views: 775
Posted By NBCat

If you have the normally aspirated engine, there...

If you have the normally aspirated engine, there is no metal water outlet available. As others have suggested, replace the water outlet assembly, which contains a new thermostat and water temp...
05-10-2019, 06:33 PM
Replies: 12
Views: 917
Posted By NBCat

Based on your description, it seems the clutch...

Based on your description, it seems the clutch driven plate is sticking to the flywheel, or there is an issue with the pressure plate diaphragm.
05-10-2019, 06:26 PM
Replies: 14
Views: 947
Posted By NBCat

May be a good idea to check the fuel pressure and...

May be a good idea to check the fuel pressure and compare it to the Workshop Manual specifications. If the pressure appears low, try changing the fuel filter first as the vehicle is ten years old.
Forum: XJ ( X351 )
05-10-2019, 02:30 PM
Replies: 38
Views: 1,827
Posted By NBCat

Do not rely on the coolant temperature gauge on...

Do not rely on the coolant temperature gauge on the instrument cluster to determine if the engine is overheating or not. Use a bluetooth interface through the OBD port and the Torque app on a smart...
Forum: XJ ( X351 )
05-10-2019, 12:43 PM
Replies: 38
Views: 1,827
Posted By NBCat

The best approach for finding the source of...

The best approach for finding the source of coolant leaks is to allow the vehicle to cold soak, preferably overnight, then use a pressure tester pumped to 1 bar to locate the leak. If the pressure...
05-07-2019, 11:17 AM
Replies: 12
Views: 1,009
Posted By NBCat

+6 on not attempting any engine swapping with an...

+6 on not attempting any engine swapping with an S-Type R.

What is wrong with the normally aspirated AJ33?
05-06-2019, 06:00 PM
Replies: 4
Views: 417
Posted By NBCat

Most likely the noise is coming from the upper...

Most likely the noise is coming from the upper control arm as some aftermarket units seem to have this fault after a few months.
05-06-2019, 05:52 PM
Replies: 3
Views: 331
Posted By NBCat

https://www.ebay.com/itm/Lisle-Tools-New-37000-Air...

https://www.ebay.com/itm/Lisle-Tools-New-37000-Air-Conditioning-Fuel-Line-Disconnect-Tool-Set-Made-in-USA/332487913822?epid=882081664&hash=item4d69d2f15e:g:wiwAAOSwjlBaMzos:sc:USPSFirstClass!92646!US!...
04-26-2019, 10:52 PM
Replies: 5
Views: 505
Posted By NBCat

Sorry for your loss; it sounds like your...

Sorry for your loss; it sounds like your grandfather is a fantastic person. You must feel quite honoured to have such memories that live with you forever as well as something he obviously treasured:...
04-26-2019, 05:19 PM
Replies: 10
Views: 449
Posted By NBCat

Find a local Jaguar specialist on the south coast...

Find a local Jaguar specialist on the south coast that has Jaguar main dealer level equipment.

Why was the ECM swapped out to begin with?
Showing results 1 to 25 of 500
 


 
Forum Jump

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.