X-Type ( X400 ) 2001 - 2009
Sponsored by:
Sponsored by:

Low oil pressure

  #1  
Old 02-01-2012, 02:57 PM
Christiaanm's Avatar
Junior Member
Thread Starter
Join Date: Feb 2012
Location: Newton by toft
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Low oil pressure

Hi I bought a saloon x type last week on 2006 to sell on and was so impressed I bought my wife an estate on a 2004 plate and this is where the trouble starts,
The car at tick over had a rattle top end nearest the cam chain and the oil light comes on faintly and strongly, i added a flush kit today and this turned the light off and stopped the rattle so I replaced oil and filter, guess what light on and rattle back so next I fitted a new oil pump it's made no difference other than the oil light is glowing stronger now, other than chucking 3 or 4 engine flushes through it tomorrow is there any obvious things? It has full main dealer history and was serviced 2000 miles ago I wondered whether the dealer could have done anything? Thanks in advance for any help given
 
  #2  
Old 02-01-2012, 05:56 PM
Thermo's Avatar
Veteran member
Join Date: May 2008
Location: Great Mills, MD
Posts: 14,196
Likes: 0
Received 3,820 Likes on 3,141 Posts
Default

Almost sounds to me that someone started the engine with no oil in the block, realized what they had done, turned the engine off and then added the oil in at that point. BUt, I am taking a big guess here. Not saying it was done intentionally, but mistakes do happen. Hence why I put the new oil on top of the motor so if I try to close the hood so I can start the car, the oil will prevent the hood from closing and provide a reminder to me to not start the car. Kinda like when the oil has been added to the engine, the empty containers sit next to the drivers door. That way, I have to move them before starting to remind myself that I have added the oil.
 
  #3  
Old 02-01-2012, 06:30 PM
Jagged Edge's Avatar
Junior Member
Join Date: Feb 2012
Posts: 16
Likes: 0
Received 3 Likes on 3 Posts
Default

You'll have low oil pressure if the main bearings are shot, maybe have a mechanic drop the pan and check the clearances.
 
  #4  
Old 02-02-2012, 08:28 AM
pab's Avatar
pab
pab is offline
Veteran Member
Join Date: Apr 2011
Location: Boston
Posts: 1,765
Received 238 Likes on 206 Posts
Default

>maybe have a mechanic drop the pan and check the clearances.

Ha, ha, ha

See the other thread about the transfer case being in the way of one of the oil pan bolts... =|-\
================================================
Jaguar: Grace, Pace, and Space - Sir William Lyons
 
  #5  
Old 02-05-2012, 03:24 PM
Christiaanm's Avatar
Junior Member
Thread Starter
Join Date: Feb 2012
Location: Newton by toft
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Sorry don't think anyone is understanding my problem it's not bottom end it's low pressure and a rattle at tickover from the rockers nearer the cam chain, I have phoned jag they have no idea so now I'm thinking is an oilway on the left side that is cooled too fast by water causing the oil to crystal over time so I'm going to throw a few cans of flush in remove the rockers at have a prod around in the oil ways, the car has full jag history and not a mark on the body so Its a good sign the car should be okay. Unless anyone knows where else there could be a blockage?
 
  #6  
Old 03-19-2012, 02:44 PM
MattO's Avatar
Junior Member
Join Date: Mar 2012
Location: NE Ohio
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

What was your finding?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bamforp
XK8 / XKR ( X100 )
26
09-26-2021 08:04 AM
99xk8guy
XK8 / XKR ( X100 )
22
09-21-2019 07:34 PM
johndahlheimer
XJ ( X351 )
7
09-16-2015 05:44 PM
hen555
XF and XFR ( X250 )
2
09-07-2015 11:13 PM
giandanielxk8
XK8 / XKR ( X100 )
7
09-06-2015 07:21 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: Low oil pressure



All times are GMT -5. The time now is 12:08 AM.