Junction Box Harness
 

Hi guys,

I'm about to swap junction box harness 9X43-14K733-ALC for my2009 2.2d dpf x-type

I never done that, i try to find procedure in workshop manual but don't find anything

Anyone has tips ?
Thanks in advance

Take lots of pictures. Why do you need to replace harness? find problem and fix it! Buy connectors if you want.

I found harness for 150e, i have can and scp short somewhere

I dont want to struggle anymore and dunno internal wiring within harness...

So i choose to swap it

The guy sent the engine harness with 15 cm cut lead of junction box harness ...

I will have to find the short

i unplug all connector until i see no short to pinpoint faulty section ?