x type 2002 broken dispstick handle
#1
#2
The dip stick is make from a ferrous material (I just went out to my X-Type and double checked). Hence, the obvious solution for you would be to use a magnet on a stick (those are available for purchase (cheap), with an extendable stick (like an antenna)) to pull the stick out with that magnet.
PS: ...if you cannot get it with small pliers or tweezers...
PS: ...if you cannot get it with small pliers or tweezers...
Last edited by Peter_of_Australia; 03-16-2024 at 06:42 AM. Reason: Added PS note
The following users liked this post:
mickvic (03-18-2024)
#3
Part number for dipstick is C2S20878. I haven't tried it but it looks like you remove 1 bolt on the dipstick tube mount then simply pull and twist the tube off. Just an O-ring sealed slip fit into the engine.
https://www.sngbarratt.com/English(U...9-72c268025dda
https://www.sngbarratt.com/English(U...9-72c268025dda
Last edited by dh53; 03-23-2024 at 02:21 PM.
The following users liked this post:
mickvic (03-24-2024)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)