Transfer box internal seal
#1
Transfer box internal seal
Hello everyone, I had a problem with my CV joint on the passenger side. Followed the directions and got to the point of taking it out of the spline. I hooked up the slap hammer and gave it a good slap. Well my luck the whole axle came out instead of separating and from the inter tranny shaft. I know what happen and why. I replaced the axle and got it all together. Well now the tranny is leaking from the axle, I don't remember seeing a seal. From what I can remember the axle went back in with no problem or resistance. I did some reading and there's a possibility that the inter seal might have gotten damage. Has anyone ever replaced this seal or know how to make the repair. Thanks for reading my tread and helping.
Vince
Vince
#2
This says there is a cir clip to remove
Transfer Box blown AGAIN!!! - Page 4
This is for changing - refitting the transfer box
http://www.jaguarforum.co.uk/f26/how...box-36534.html
Transfer Box blown AGAIN!!! - Page 4
This is for changing - refitting the transfer box
http://www.jaguarforum.co.uk/f26/how...box-36534.html
#3
The internal seals (there are two) are a pain to get to. There's more about it and some pictures on this thread: https://www.jaguarforums.com/forum/x...er-case-93353/
Thread
Thread Starter
Forum
Replies
Last Post
aholbro1
XJ XJ6 / XJR6 ( X300 )
17
08-05-2021 05:02 AM
FS[Western US]: Jaguar xk accessories for sale
jfitzoz
PRIVATE For Sale / Trade or Buy Classifieds
0
09-07-2015 04:28 AM
MC36
US Lower Atlantic
0
09-01-2015 07:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)