Cruise control wiring
Last summer the dreaded "Cruise control not available" started to show up randomly as I drove. Eventually I became always illuminated. Since then I had a issue with the suspension compressor and am in the process of rebuilding. Thought I'd look at the front sonar under the bumper cover. While inspecting there was a severed wire which is light brown with a white tracer. I used a high quality but connector and shrink tube to repair. During the diagnosis of the compressor I accidentally turned the car on with the front sonar unplugged. Still have the CCNA message. I comes on differently now as the car is started rather than when it started to move.
Anyone have a schematic of the wiring to see if the severed tan w/white tracer actually does? I hope it is not resistance measuring … |
All times are GMT -5. The time now is 08:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands