x300 carbon fiber vinyl dash
#1
x300 carbon fiber vinyl dash
i was curious to see if the carbon fiber look would be better....not in my opinion,but at least now i know,it didnt take too long,i used the scott,6 layer wrap,individually,i liked the look of the trim pieces,but after installation,it just did not look correct,i will leave it on for a couple of days to see if it grows on me
The following users liked this post:
Datsports (05-04-2017)
#3
Well, if your wood is cracked and faded, this or a different pattern may be a good alternative to refinishing or replacement (good luck finding any NOS).
I've chatted with auto trim refinishers and so far none do the odd greenish/gray/black birdseye maple in the XJRs including British Auto Wood.
.
I've chatted with auto trim refinishers and so far none do the odd greenish/gray/black birdseye maple in the XJRs including British Auto Wood.
.
#4
today i also did the ski slope and ashtray,i put leftover patches on the knob just to get a idea of end result...i already removed it from the knob,i will wait a few days to decide if i will proceed and try to replace everything with real carbon fiber replacements or maybe i will attempt to refinish the wood
d with new resin
looks ok,but not what i thought it would be
d with new resin
looks ok,but not what i thought it would be
Last edited by michaelmedina2005; 05-05-2017 at 04:13 PM. Reason: info