PRND Gearbox Lighting issues
#1
PRND Gearbox Lighting issues
Hi all,
Was wondering if you guys knew what bulbs I need to replace my PRND gearbox lighting? (pic isn't the best, but from P to R the green line doesn't light up. same with the 2 to 3) I tried to take it off myself today to have a look but did not want to risk breaking parts.
Thanks!!
Was wondering if you guys knew what bulbs I need to replace my PRND gearbox lighting? (pic isn't the best, but from P to R the green line doesn't light up. same with the 2 to 3) I tried to take it off myself today to have a look but did not want to risk breaking parts.
Thanks!!
Last edited by XJ8Lou; 09-16-2016 at 05:21 PM.
#2
https://www.jaguarforums.com/forum/xj-xj8-xjr-x308-27/j-gate-shifter-lighting-135578/
I just replaced the 2 soldered in backlighting bulbs. Replace them both at the same time. If you'are also not getting some of the red letters, those are red LED's and I don't have any information on those. If you are doing the soldering, take your time with the whole process.
I just replaced the 2 soldered in backlighting bulbs. Replace them both at the same time. If you'are also not getting some of the red letters, those are red LED's and I don't have any information on those. If you are doing the soldering, take your time with the whole process.
The following users liked this post:
XJ8Lou (09-23-2016)
#4
https://www.jaguarforums.com/forum/x...cklight-75330/
It looks like your upper backlight lamp is out. Both of mine were out, I used Chicago Miniature 8097 bulbs for replacements.
It looks like your upper backlight lamp is out. Both of mine were out, I used Chicago Miniature 8097 bulbs for replacements.
The following users liked this post:
XJ8Lou (09-23-2016)
Thread
Thread Starter
Forum
Replies
Last Post
shemp
Jaguar Forums Feedback & Suggestion Center
2
09-14-2016 01:25 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)