Jaguar Forums - Jaguar Enthusiasts Forum

Jaguar Forums - Jaguar Enthusiasts Forum (https://www.jaguarforums.com/forum/)
-   S-Type / S type R Supercharged V8 ( X200 ) (https://www.jaguarforums.com/forum/s-type-s-type-r-supercharged-v8-x200-15/)
-   -   Rear bumper/bumperette cover removal? (https://www.jaguarforums.com/forum/s-type-s-type-r-supercharged-v8-x200-15/rear-bumper-bumperette-cover-removal-48538/)

55chevy 01-15-2011 11:07 PM

Rear bumper/bumperette cover removal?
 
I've been perusing the FAQs and How-tos, saw a front bumper removal, but not a rear. My left rear chrome bumperette has a dent, I think I can straighten it out, but need guidance on removing it. I admit, I haven't even looked under there yet, may be simple, but I'm a lil concerned about those two painted button/clips just inside the chrome pieces. What is up with those buttons anyway? I've seen them on other cars and they just look stupid, what designer thought they were attractive?

aholbro1 01-16-2011 12:00 AM

I think you may be talking about the sensors for the reverse sensing system. Makes an ever more frequent chirp in the cabin as you close in on an obstacle in reverse. I forget the ranges...but maybe begins at 3 ft or so and goes to steady tone about 8 inches?

joycesjag 01-16-2011 07:12 AM

chevy, the rear bumper facia has about 40 bolts that need to be removed, the tail lights need removed, the stereo stack and the REM bracket. It appears to be quite a project to remove! Are the bumperets fastened with screws or are they 3M taped, hmm??? Maybe check with Mina Gallery for replacements. http://www.minagallery.com/jagxp/Jag...mperblades.htm

androulakis 01-16-2011 03:58 PM

2 Attachment(s)

Originally Posted by joycesjag (Post 293469)
chevy, the rear bumper facia has about 40 bolts that need to be removed, the tail lights need removed, the stereo stack and the REM bracket. It appears to be quite a project to remove! Are the bumperets fastened with screws or are they 3M taped, hmm??? Maybe check with Mina Gallery for replacements. http://www.minagallery.com/jagxp/Jag...mperblades.htm

The original jaguar bumper blades have 4 tabs on them attaching them to the bumper, I was only able to find a crappy pic but it shows you the tabs.

https://www.jaguarforums.com/forum/a...1&d=1295215075

I think you have to remove the rear bumper cover to get to them to replace it though.

I'm also attaching the rear bumper removal / reinstall procedure. Seems like a fun afternoon.

Take care,

George

joycesjag 01-16-2011 07:32 PM

Nice find George! "Seems like a fun afternoon" as long as you add a more than a couple of cold ones!!!

Funny how alldatadiy basically has the same pictures and procedures.

StypeRpmf 07-07-2012 06:34 PM

This is great. Have to replace my rear bumber cover on my 2005 s stype r. Can you tell me if there would be any difference in 2004 vs 2005?

joycesjag 07-07-2012 08:17 PM


Originally Posted by StypeRpmf (Post 540771)
This is great. Have to replace my rear bumber cover on my 2005 s stype r. Can you tell me if there would be any difference in 2004 vs 2005?

Probably not.

Have fun!

JagV8 07-08-2012 08:02 AM

What Rick said, except they may be LOL

There were many many changes in body parts in 2004-5.

You could hunt through JEPC (or maybe an online parts store) if you want to check.


All times are GMT -5. The time now is 11:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands