Still got the cup holder?
Need one for my XJ

 

Sorry the hinge cover was cracked badly and has since been thrown out.

 

Bcrary, I do have the cupholder. It's a bit dusty/dirty, can send pics. Will also send PM.

 

looking for 2 rear exhaust system support brackets. they mount against the frame and have rubber insert which a rod attached to the muffler/exhaust pipe goes in

 

Monster, haven't removed any exhaust parts yet, but I think I know what you are looking for. Let me have a look tonight and check condition.

EDIT-
Here is what I have. Condition is decent: some surface rust, rubbers are dried out some.



PM me if interested. Shipping should be cheap.

 

Mine looks like this

 

Monster, I see that part on the IPC. It is further "upstream" from the ones I pulled, connected to the pipe rather than the muffler. Let me get under there tonight and see what's there.

 

Monster, on further review I don't think I have what you need. My IPC shows the parts I have. But found a different one online that shows what you are looking for in same location on the car. They must have put in a different design at some point. Mine is a 97, so definitely oldest possible. Sorry.

 

Did you already sell the seats? I don't see them on your list. Might be interested in a driver's side seat leather, depending on color. Also, did you end up selling the radio/cassette head unit?

 

John,
leather covers were in really bad shape and have been tossed. You would not have wanted them.

Radio/cassette is still available. It's an older (and less common?) model p/n LJA4100BA. Imperfect condition, the display is partly "blacked out" on the right side. It does work, I used to play tapes in it too. PM me if it will work for you.

 

@CyJag, thanks for the photo. It's the right model, but the problem with mine I'm debugging is screen issues...works fine. So another one with screen issues wouldn't get me anywhere, really. Anyway, since yesterday I'm debugging a microswitch/rotary switch issue in the trans/shift. Thanks anyway!

 

Would you happen to still have the shifter surround? If you do, what shape is it in?

 

Waldo, still have the surround. Attaching a pic, you can see a couple cracks. PM me if interested.

 

CyJag, I have a wish list:


JLM21684 Navigation System Adjustment Knob (joystick)
Right quarter window regulator/motor
Right tail light lens
Floor mats
J-gate shifter cover plate

Have any of these?
Thanks!


2000 XK8 Convertible
Miles: 93,300
Exterior: Titanium
Interior: Oatmeal

 

L&H,

I didn't have a nav system, and already sold the tail lights. On the shifter cover plate, I have sold the black plastic piece (last week), but still have the wood trim veneer if that is what you mean.

I do have the floor mats and the right rear window reg/motor.

The window regulator still has the glass attached, here's a pic of that.




The floor mats, let me send you a pic to confirm condition, I am not sure how worn they are. Would you also be interested in the footwell carpets? I did remove those and they are in good shape.

Do you have an email addr? Its easier for me to send pics that way. You can PM or email me via the forum.

Thanks for the interest.

 

CyJag, I'm a new member and can't PM anyone yet. Sorry. And I don't know how to email without publishing my address to the world. And I'm not yet allowed to send pics. Any pearls of wisdom would be appreciated. I would like to know pricing of floor mats (if in good shape and for oatmeal color interior) and the right rear window reg/motor. My footwell carpeting is in good shape though, but thanks. Shifter plate I need is the plastic piece that has the P R N D 2 3 4 printed on it -- the one that commonly breaks. Could also use covers for both shoulder belts, and covers for seatback hinges (passenger's right side and driver's left side). Driver seat electric control switch set housing is broken (tab broken?) and could use a replacement. Thanks.

 

I need a rear view mirror and a center arm console with a trim code of oatmeal. Please let me know. My vehicle has auto lights and traction control, important info for the mirror.

 

Love & Hate, PM sent. Here is the switchpack pic:

 

Terry,
I did not have auto headlights on my 97, only the auto-dimming for the mirror. My rear view mirror pn is HJA3121AA if that helps.

For the center console, which piece do you mean exactly? If it is the flip-up armrest, mine is trash. If it is something else, please send me a pic or link. Thanks, hope I can help. Steve

 

I'm looking for the center console cover with cup holder and also drivers seat base.