Hello:

Anyone know the part number for the bonnet latch pin receiver rubber bushing?

It the round a rubber bushing that it on the body that the latch pin rests on when the bonnet is closed.


It's the round rubber bushing next to the tool compartment in the bottom left part of the picture below.

 

I don't know the part name or number but it is the same as the 4 rubber parts on the intake manifold for the 2 engine covers if that helps any...

 

You may have to purchase the whole assembly. I did a search using "hood latch" or "bonnet latch" with the car model and this is what I found in one of my site favorites...Jaguar Hood Latch/Lock Xj8, Vdp, Xjr 98-03. HNC2400AC - Jaguar Parts Specialist ...yes its a used piece (they show a part number), hope that helps.
You can try this one also, with that part number, to see what comes back... http://car-part.com/ ...I tried that part number on sites that have new parts and they came back as no long available.

 

Rpach10115,
Where did you acquire those red engine panels,thanks.

 

OMG. This part is a bitch to find. I called loads of dealers this month and they said they will order it, but I asked them double check because they are in back order and Jaguar does not make this part anymore. Used is your best bet. I got lucky and got new brand new one for $20 on bid from ebay uk couple days ago.