Carbon Fiber Diffuser Recommendations

Reply Subscribe

Thread Tools

Search this Thread

Jul 11, 2018 | 03:16 PM

herane

Thread Starter

Member

Joined: Jun 2017

Posts: 41

Likes: 3

From: MA

Carbon Fiber Diffuser Recommendations

Looking for recommendations for a carbon fiber diffuser for the 2016 Jaguar F-Type R. After a little accident at the track, some gravel knocked my diffuser loose... I figured it would be a good time to replace it. I would also appreciate any links/instructions so that I can do the job myself. My service tech said that the stock diffuser is help on by 3M tape so I'm hoping it'll be an easy replacement.

Jul 11, 2018 | 05:26 PM

Unhingd

Veteran Member

Joined: Dec 2014

Posts: 16,948

Likes: 4,728

From: Maryland, US

Nope...no 3M tape. Just a whole bunch of screws. Very easy. You can probably even do it without jacking up the car, but a bit easier if you jack the rear of the car up on one of the sides.

Jul 11, 2018 | 05:57 PM

mrjohnt

Senior Member

Joined: Jul 2018

Posts: 183

Likes: 38

Quote:

Originally Posted by Unhingd

Nope...no 3M tape. Just a whole bunch of screws. Very easy. You can probably even do it without jacking up the car, but a bit easier if you jack the rear of the car up on one of the sides.

So its not held on by tabs? I thought I saw some tabs when I looked at it.
Coming from a C63, aftermarket carbon fiber rear diffusers held on by tabs fit terrible.
Do the aftermarket carbon diffusers for the F-Type fit better?

Jul 11, 2018 | 08:06 PM

Unhingd

Veteran Member

Joined: Dec 2014

Posts: 16,948

Likes: 4,728

From: Maryland, US

Quote:

Originally Posted by mrjohnt

Yes, there are tabs, but everything is secured together with screws, not tape.

Jul 11, 2018 | 10:50 PM

dmchao

Senior Member

Joined: Dec 2017

Posts: 665

Likes: 134

I have an OEM carbon fiber on mine, tabs fit quite tightly and obviously do require adjustment with a rubber hammer for good fitment, but the screws take care of securing it.

Jul 12, 2018 | 10:59 AM

herane

Thread Starter

Member

Joined: Jun 2017

Posts: 41

Likes: 3

From: MA

where can I buy a good quality diffuser

Quote:

Originally Posted by Unhingd

Nope...no 3M tape. Just a whole bunch of screws. Very easy. You can probably even do it without jacking up the car, but a bit easier if you jack the rear of the car up on one of the sides.

Thanks for the recommendation Unhingd, I'm thinking about doing the job in my driveway by reversing the car onto some ramps.
Does anyone have any links as to where I can purchase a nice GT style carbon fiber rear diffuser? I'm located in the US