DIY: Spacer's install for F-Type
Thread Starter
|
Junior Member
Joined: Oct 2019
Posts: 29
Likes: 19
From: Edmond, OK
DIY: Spacers install for F-Type
I have seen this thread pop up numerous times, so I figured I would make a video to help.
One positive of COVID-19 is the free time to make and edit videos lol
One positive of COVID-19 is the free time to make and edit videos lol
Last edited by conbrash; Mar 18, 2020 at 10:26 AM.
Veteran Member
Joined: Feb 2014
Posts: 9,021
Likes: 3,658
From: Adelaide, South Australia
Good stuff!
I like how you explained about the Blade wheels being the exception to the rule with 15 mm adaptors.
You also used the EXACT same spacers I have - 15 mm Teeze brand!
And the exact same 19 mm plastic sleeved socket with 1/2" breaker bar that I use.
Just one hint for young players - yes you need a helper with their foot on the brake pedal to fit the adaptors on the front wheels, but you don't need any help for the rears, instead just apply the EPB.
I like how you explained about the Blade wheels being the exception to the rule with 15 mm adaptors.
You also used the EXACT same spacers I have - 15 mm Teeze brand!
And the exact same 19 mm plastic sleeved socket with 1/2" breaker bar that I use.
Just one hint for young players - yes you need a helper with their foot on the brake pedal to fit the adaptors on the front wheels, but you don't need any help for the rears, instead just apply the EPB.
Thread
Thread Starter
Forum
Replies
Last Post
Dan_NL
F-Type ( X152 )
2
Oct 14, 2019 03:11 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
