Reading correct intake temperature on newer f-types
Reading correct intake temperature on newer f-types
It appears on newer FTypes 2016 + IAT sensor can not be read with simple OBD2 adapter. On older setups it's not a problem temperature shows just fine, but on newer appear to be showing ambient in place of IAT. Even HP tunners loging setup doesn't read it.
Anyone have figured this out or have correct PID to be used with torque pro to monitor this?
Anyone have figured this out or have correct PID to be used with torque pro to monitor this?
__________________
2008 XKR Convertible, (mods: AlphaJagTuning ECU Tune , 1.5lb pulley, (200cel cats( are now melted), xpipe, Bosch 001 pump, 180 Thermostat.
Drag strip : 7.9sec 1/8mi 90 MPH . 1/4 mile 12.55 at 112.98mph
432rwh Dyno on Mustang Dynometer , Approx 511 crank HP.
2013 XJ 5.0 SC (Alpha Jag ECU, TCU tune, crank pulley), 600+ HP, 11.6 sec 1/4th mi 122mph, 7.6sec 1/8th mi
2018 Jaguar F-Type (AlphaJag ECU TCU, lower upper pulleys intake) 10.77 ,131mph ,700hp
2008 XKR Convertible, (mods: AlphaJagTuning ECU Tune , 1.5lb pulley, (200cel cats( are now melted), xpipe, Bosch 001 pump, 180 Thermostat.Drag strip : 7.9sec 1/8mi 90 MPH . 1/4 mile 12.55 at 112.98mph
432rwh Dyno on Mustang Dynometer , Approx 511 crank HP.
2013 XJ 5.0 SC (Alpha Jag ECU, TCU tune, crank pulley), 600+ HP, 11.6 sec 1/4th mi 122mph, 7.6sec 1/8th mi
2018 Jaguar F-Type (AlphaJag ECU TCU, lower upper pulleys intake) 10.77 ,131mph ,700hp
Senior Member
Joined: Jun 2024
Posts: 557
Likes: 279
From: SacTown
There was a IAT2 PID hack here (subtract -40C) for Torque but not sure it works. It didn't for me.
https://www.jaguarforums.com/forum/g...-213503/page3/
But now I see you actually chimed in 5 years ago! Any other thoughts?
https://www.jaguarforums.com/forum/g...-213503/page3/
But now I see you actually chimed in 5 years ago! Any other thoughts?
There was a IAT2 PID hack here (subtract -40C) for Torque but not sure it works. It didn't for me.
https://www.jaguarforums.com/forum/g...-213503/page3/
But now I see you actually chimed in 5 years ago! Any other thoughts?
https://www.jaguarforums.com/forum/g...-213503/page3/
But now I see you actually chimed in 5 years ago! Any other thoughts?
__________________
2008 XKR Convertible, (mods: AlphaJagTuning ECU Tune , 1.5lb pulley, (200cel cats( are now melted), xpipe, Bosch 001 pump, 180 Thermostat.
Drag strip : 7.9sec 1/8mi 90 MPH . 1/4 mile 12.55 at 112.98mph
432rwh Dyno on Mustang Dynometer , Approx 511 crank HP.
2013 XJ 5.0 SC (Alpha Jag ECU, TCU tune, crank pulley), 600+ HP, 11.6 sec 1/4th mi 122mph, 7.6sec 1/8th mi
2018 Jaguar F-Type (AlphaJag ECU TCU, lower upper pulleys intake) 10.77 ,131mph ,700hp
2008 XKR Convertible, (mods: AlphaJagTuning ECU Tune , 1.5lb pulley, (200cel cats( are now melted), xpipe, Bosch 001 pump, 180 Thermostat.Drag strip : 7.9sec 1/8mi 90 MPH . 1/4 mile 12.55 at 112.98mph
432rwh Dyno on Mustang Dynometer , Approx 511 crank HP.
2013 XJ 5.0 SC (Alpha Jag ECU, TCU tune, crank pulley), 600+ HP, 11.6 sec 1/4th mi 122mph, 7.6sec 1/8th mi
2018 Jaguar F-Type (AlphaJag ECU TCU, lower upper pulleys intake) 10.77 ,131mph ,700hp
Thread
Thread Starter
Forum
Replies
Last Post
al_roethlisberger
XJ XJ6 / XJR6 ( X300 )
17
Jul 16, 2025 09:55 AM
oilstain
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
2
Oct 12, 2016 10:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)