F-Type ( X152 ) 2014 - Onwards
Sponsored by:
Sponsored by:

Replace Gold Dynamic/Mode Button

Thread Tools
 
Search this Thread
 
  #1  
Old 06-01-2017, 02:12 AM
Cj10jeeper's Avatar
Junior Member
Thread Starter
Join Date: May 2017
Location: Lichfield
Posts: 12
Received 6 Likes on 4 Posts
Default Replace Gold Dynamic/Mode Button

I'm sure this has been asked but can't see it on a search.

I've replaced the gold paddles and starter button with alloy/silver but the small amounts of gold on the dynamic/mode buttton are annoying.
Dealer finds me 2 parts but says neither fit a V6S. Parts catalogue gets me what I already have

Can anyone point me to the right part for an MY14

Thanks
 
  #2  
Old 06-01-2017, 05:48 PM
MI-FType's Avatar
Senior Member
Join Date: Oct 2014
Location: Michigan
Posts: 471
Received 135 Likes on 107 Posts
Default

Silver start button?

Do you have a part number?

Regarding the switch, all 14's came with the Ignis colored switch. Did you try searching for a part number on the '15 and newer Base or '16 and newer R? They have the chrome switch. Should be interchangeable, just a different finish.
 
  #3  
Old 06-01-2017, 06:08 PM
MI-FType's Avatar
Senior Member
Join Date: Oct 2014
Location: Michigan
Posts: 471
Received 135 Likes on 107 Posts
Default

Looked in an online parts catalog it says the chrome switch T2R10130 fits up to VIN K22184. Maybe member Cambo can confirm if it will also fit your car. You may need to provide him with the VIN.
 
  #4  
Old 06-02-2017, 04:14 AM
Cj10jeeper's Avatar
Junior Member
Thread Starter
Join Date: May 2017
Location: Lichfield
Posts: 12
Received 6 Likes on 4 Posts
Default

I went to the dealers and left it with them as they were ordering other parts. They came back with assorted part numbers and noted none were compatible with mine. Given they were from memory £24 and £44 they sounded very different so I left it.
The other bits have changed easily from Ignis to silver - paddles and starter

My Vin is lower than K22184 so based upon the above post I think that should fit and will give it a try
 
  #5  
Old 06-02-2017, 03:09 PM
Cj10jeeper's Avatar
Junior Member
Thread Starter
Join Date: May 2017
Location: Lichfield
Posts: 12
Received 6 Likes on 4 Posts
Default Ordered the new switch

Well the new switch is on order so we'll see if it's compatible. I'll post results when it arrives and I get a chance to fit it
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:06 AM.