18mm wheel spacer set for cars with carbon ceramic cars
For SaleSteering/Suspension
Sep 26, 2019, 04:44 PM | Replies: 4 | Views: 1102
Senior Member
Join Date: Jun 2016
Posts: 376
-
Price
$220• OBO
- Location Los Angeles, CA, 90064, USA
- Condition Used
- Compatibility
| Make | Model | Year |
|---|---|---|
| Jaguar | F-Type | 2015 - 2020 |
Description:
Had these on my R with CCM brakes, combined with the storm wheels, the wheels will be flush with the fender, and looked great.
Photos attached, let me know if there are any questions.
Last edited by Mpowerr; Sep 27, 2019 at 02:05 PM.
Reply
Thread Starter
|
Senior Member
Joined: Jun 2016
Posts: 376
Likes: 56
From: LA
Short answer yes. Long answer, as follows.
I was running these on my R with and they had the factory wheels flush. Here are a couple of photos so you can see. https://www.jaguarforums.com/forum/f...wheels-220301/
as long as you don’t lower the car excessively you should be ok I believe. The difference between the carbon ceramic setup and the steel brakes as far as spacers are concerned is the outer diameter. I believe the outer diameter is smaller by about 10mm. So the overall diameter of the spacer is a bit smaller than the back pad.
You could use spacers from a carbon ceramic setup on a steel brake car but not vice versa
I was running these on my R with and they had the factory wheels flush. Here are a couple of photos so you can see. https://www.jaguarforums.com/forum/f...wheels-220301/
as long as you don’t lower the car excessively you should be ok I believe. The difference between the carbon ceramic setup and the steel brakes as far as spacers are concerned is the outer diameter. I believe the outer diameter is smaller by about 10mm. So the overall diameter of the spacer is a bit smaller than the back pad.
You could use spacers from a carbon ceramic setup on a steel brake car but not vice versa
