Description:

Here are all the parts required to install a Tremec TKO 5 or 6 onto an AJ6 or AJ16 engine, including engine adapter plate (one for AJ6 and one for AJ16), flywheel (the much preferred standard version, much more responsive than the Dual Mass type and smoother than ultra-light), bell-housing, adapter plate for Tremec to bell-housing, throw-out bearing carrier & fork, and all fasteners required.
This can be used to convert from Automatic or upgrade Jaguar / Getrag manual to a modern high performance Tremec 5 or 6 speed in your AJ type 6 cylinder XJS, XJR, or XJ6. All other parts required to convert as well as clutch kits are easily available.
I would suggest using a hydraulic throw-out bearing, but the original system can be used and the adapter plate is marked for machining to use the original type slave cylinder.
You can also use this to convert from automatic to Jaguar / Getrag and sell the Tremec adapter plate, but why use an outdated box when you can use a current, high performance one?
Parts are all in very good condition, I would recommend having the flywheel re-surfaced as a matter of course.
This will ship from Central Florida.
I have a lot into this (just the Tremec adapter plate typically goes for over a grand if you can find one) but the project it was put together for did not happen so make me a reasonable offer and put this to use!