new to the forum
#1
new to the forum
hello,
new to this forum,have had the jag for years (1998 vdp)
i discovered a problem yesterday that hopefully someone has insight into.
my hood will not release on the drivers side. passenger side is working correctly. i removed the plastic inner fender on the wheel well which did not give access to the hood latch from underneath. has anyone had this problem and solved it? do i have to cut a hole in the metal to access the latch and if so where?
any help will be greatly appreciated,
eric
new to this forum,have had the jag for years (1998 vdp)
i discovered a problem yesterday that hopefully someone has insight into.
my hood will not release on the drivers side. passenger side is working correctly. i removed the plastic inner fender on the wheel well which did not give access to the hood latch from underneath. has anyone had this problem and solved it? do i have to cut a hole in the metal to access the latch and if so where?
any help will be greatly appreciated,
eric
The following users liked this post:
markisen (10-09-2011)
#3
Join Date: Oct 2007
Location: PHX some of the time
Posts: 116,872
Received 6,273 Likes
on
5,470 Posts
#4
Join Date: Nov 2006
Location: Glasgow, Scotland UK
Posts: 47,302
Received 9,006 Likes
on
4,113 Posts
welcometo the site, great to have you here with us at JF.
Please post pics when you can
I'm sure we can help with any issues / questions you may have
Some great guys here, top techs, good info and more than a few laughs here n there, so jump in and enjoy......
manually upgraded you to full forum access so you can better view the site.......enjoy your time here
#5
The following users liked this post:
markisen (10-12-2011)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)