Hi, just started working on my '88 XJSC again. It's been in storage for the last 7 years. Good to see her on the road again.

 

Just replaced the Ski-Slope wood pannel - went smoothly with all the recommendations in other posts. Then I started replacing the Oil Pressure idiot light sending unit. Got the old one out & now have lost the new one on top of the bell housing. Maybe I'll have better luck finding it tomorrow!

 

Welcome to the forum JT-1998-XJSC,

Good to have you with us.
It sounds like you found the tech section, if not here is a link XJS - Jaguar Forums - Jaguar Enthusiasts Forum take a look in the regional section too https://www.jaguarforums.com/forum/southwest-us-az-tx-nm-ok-37/
Enjoy the forum.

If you haven't already done so you should add your car details to your signature to help others to help you.

 

Thanks, just added a few details.

 

Welcome to the forum JT-1998-XJSC,

Sounds like there's not too much to do to get the XJS back on the road after the seven year layup.

Good luck finding the sender.

Enjoy the forum.

Graham

 

Found the sending unit & got it installed. Used some fishing line to hold it in a rubber hose to get it started. I always wondered what the hole in the connector was for : )

 

Hey there and welcome aboard....... good to have you here with us here at Jaguarforums

Any useful site information you may need such as how to post pictures, edit signatures, add videos, use the search facility etc, can be found here
within the following link Helpful_information

Please also take the time to check out the regional section for your area!
There are lots of members local to you with the same interests with info on local dealers and possible meets.
Regional - Jaguar Forums - Jaguar Enthusiasts Forum

I've manually upgraded you to Full forum access so you can better view the site and all its features
Please Jump on in and enjoy the site.................