Mark this thread as Unsold
FS[UnitedKingdom]: Diagnostics - Autoenginuity with Jaguar Enhancement
Thread Starter
|
Veteran Member
Joined: Feb 2012
Posts: 1,093
Likes: 1,016
From: Manchester UK
Diagnostics - Autoenginuity with Jaguar Enhancement
For sale is my genuine AutoEnginuity vehicle interface with Jaguar specific enhancement activated. This comes as a turn key system including a Dell XPS laptop with software and drivers installed and tested. Also installed on the laptop is JTIS and JEPC. Price £170 plus postage at cost.
More detail below if this interests you.
The Autoenginuity interface is 6 years old (purchased January 2010) so is likely to be a bit different to their current offering. It supports most modules on most Jaguar vehicles up to 2009 (and will operate for generic powertrain interface on later vehicles). If you want to know specifically whether your car is supported then please ask and I will look in the program interface but obviously I cannot test it. For local buyers you are welcome to try before you buy.
It supports from X300 1995MY (Engine, Transmission, ABS, BPM, AC)
All program install files are included on the laptop, and the activation key for the Jaguar Enhancement, should you need to reinstall at any time.
The AE interface was a backup for my VCM/IDS system so has had very little use.
The Laptop
The laptop is a standard Dell XPS M1330 with genuine Windows XP Pro installed. It has been a dedicated diagnostic laptop for me. It won’t win any beauty contests but is fully functional as far as use for that purpose and with this interface (and other interfaces I’ve used for other vehicles). I have never tried most of the bells and whistles that come with it (webcam, HDMI, Firewire etc) so assume they don’t work.
Genuine Windows XP Pro (SP 3)
Intel Core 2 Duo Processor 1.66GHz
2Gb RAM
250Gb Hard Disk
CD/DVD Drive
13” Screen
New keyboard fitted. Battery was replaced 18 months ago and is good.
Small issues - I think it needs a new CMOS battery. If the main battery is removed, the date and a couple of other parameters on the laptop need to be reset. This takes about 1 min to do.
There is a slight imperfection on screen bottom right corner but does not affect the screen content (see photo).
Also attached a few screenshots taken today on the laptop showing the interface connected to my 1995 X300, and also showing JTIS and JEPC running.
More detail below if this interests you.
The Autoenginuity interface is 6 years old (purchased January 2010) so is likely to be a bit different to their current offering. It supports most modules on most Jaguar vehicles up to 2009 (and will operate for generic powertrain interface on later vehicles). If you want to know specifically whether your car is supported then please ask and I will look in the program interface but obviously I cannot test it. For local buyers you are welcome to try before you buy.
It supports from X300 1995MY (Engine, Transmission, ABS, BPM, AC)
All program install files are included on the laptop, and the activation key for the Jaguar Enhancement, should you need to reinstall at any time.
The AE interface was a backup for my VCM/IDS system so has had very little use.
The Laptop
The laptop is a standard Dell XPS M1330 with genuine Windows XP Pro installed. It has been a dedicated diagnostic laptop for me. It won’t win any beauty contests but is fully functional as far as use for that purpose and with this interface (and other interfaces I’ve used for other vehicles). I have never tried most of the bells and whistles that come with it (webcam, HDMI, Firewire etc) so assume they don’t work.
Genuine Windows XP Pro (SP 3)
Intel Core 2 Duo Processor 1.66GHz
2Gb RAM
250Gb Hard Disk
CD/DVD Drive
13” Screen
New keyboard fitted. Battery was replaced 18 months ago and is good.
Small issues - I think it needs a new CMOS battery. If the main battery is removed, the date and a couple of other parameters on the laptop need to be reset. This takes about 1 min to do.
There is a slight imperfection on screen bottom right corner but does not affect the screen content (see photo).
Also attached a few screenshots taken today on the laptop showing the interface connected to my 1995 X300, and also showing JTIS and JEPC running.
Member
Joined: Jul 2015
Posts: 68
Likes: 2
From: St Davids, UK
For sale is my genuine AutoEnginuity vehicle interface with Jaguar specific enhancement activated. This comes as a turn key system including a Dell XPS laptop with software and drivers installed and tested. Also installed on the laptop is JTIS and JEPC. Price £170 plus postage at cost.
More detail below if this interests you.
The Autoenginuity interface is 6 years old (purchased January 2010) so is likely to be a bit different to their current offering. It supports most modules on most Jaguar vehicles up to 2009 (and will operate for generic powertrain interface on later vehicles). If you want to know specifically whether your car is supported then please ask and I will look in the program interface but obviously I cannot test it. For local buyers you are welcome to try before you buy.
It supports from X300 1995MY (Engine, Transmission, ABS, BPM, AC)
All program install files are included on the laptop, and the activation key for the Jaguar Enhancement, should you need to reinstall at any time.
The AE interface was a backup for my VCM/IDS system so has had very little use.
The Laptop
The laptop is a standard Dell XPS M1330 with genuine Windows XP Pro installed. It has been a dedicated diagnostic laptop for me. It won’t win any beauty contests but is fully functional as far as use for that purpose and with this interface (and other interfaces I’ve used for other vehicles). I have never tried most of the bells and whistles that come with it (webcam, HDMI, Firewire etc) so assume they don’t work.
Genuine Windows XP Pro (SP 3)
Intel Core 2 Duo Processor 1.66GHz
2Gb RAM
250Gb Hard Disk
CD/DVD Drive
13” Screen
New keyboard fitted. Battery was replaced 18 months ago and is good.
Small issues - I think it needs a new CMOS battery. If the main battery is removed, the date and a couple of other parameters on the laptop need to be reset. This takes about 1 min to do.
There is a slight imperfection on screen bottom right corner but does not affect the screen content (see photo).
Also attached a few screenshots taken today on the laptop showing the interface connected to my 1995 X300, and also showing JTIS and JEPC running.
More detail below if this interests you.
The Autoenginuity interface is 6 years old (purchased January 2010) so is likely to be a bit different to their current offering. It supports most modules on most Jaguar vehicles up to 2009 (and will operate for generic powertrain interface on later vehicles). If you want to know specifically whether your car is supported then please ask and I will look in the program interface but obviously I cannot test it. For local buyers you are welcome to try before you buy.
It supports from X300 1995MY (Engine, Transmission, ABS, BPM, AC)
All program install files are included on the laptop, and the activation key for the Jaguar Enhancement, should you need to reinstall at any time.
The AE interface was a backup for my VCM/IDS system so has had very little use.
The Laptop
The laptop is a standard Dell XPS M1330 with genuine Windows XP Pro installed. It has been a dedicated diagnostic laptop for me. It won’t win any beauty contests but is fully functional as far as use for that purpose and with this interface (and other interfaces I’ve used for other vehicles). I have never tried most of the bells and whistles that come with it (webcam, HDMI, Firewire etc) so assume they don’t work.
Genuine Windows XP Pro (SP 3)
Intel Core 2 Duo Processor 1.66GHz
2Gb RAM
250Gb Hard Disk
CD/DVD Drive
13” Screen
New keyboard fitted. Battery was replaced 18 months ago and is good.
Small issues - I think it needs a new CMOS battery. If the main battery is removed, the date and a couple of other parameters on the laptop need to be reset. This takes about 1 min to do.
There is a slight imperfection on screen bottom right corner but does not affect the screen content (see photo).
Also attached a few screenshots taken today on the laptop showing the interface connected to my 1995 X300, and also showing JTIS and JEPC running.
Thread
Thread Starter
Forum
Replies
Last Post
mhamilton
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
6
May 1, 2016 05:59 PM
FS[SouthWest]: (2) Front Bilstein Touring Class Shocks for XJ40/X300
SD96XJ6L
PRIVATE For Sale / Trade or Buy Classifieds
0
Apr 3, 2016 10:11 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)