Hi Guys,

When I brought the car the dealer said that the powerwash covers had been forced off one night by passers by - yep car parked against a wire mesh fence on the plot - however he has ordered and had replacement power wash covers - correctly colour coded for the car.

Great I thought - but I seem to have no physical link from the covers to the ends of the powerwash pipe just inside the hole in the bumper.

I guess I am looking for either the linkage between the end of the pipe and the cover (left and right) as the lugs on the cover appear to be at 90 degrees to the lugs on the pipe and no locating pins or a method of disabling the powerwash and just fitting the covers into place on the bumper with silicon or equivalent.. the manual says engine compartment box fuse 11 for the powerwash but for the life of me I cant see the windscreen wash listed against any fuse so am guessing pulling that fuse would stop the pipes popping out but also my windscreen wash...

I am open to any cost effective solutions that dont leave me with the two holes at the front :-)

Many thanks, Steve

 

I have been digging through the threads and one about the windscreen wash seems to suggest relay 13 for the powerwash and 4 for the widscreen wash (both in the ubnder the bonnet fusebox - can anyone confirm this at all? Many thanks