S type front fender skin
#1
S type front fender skin
My 2000 s Type (US),,right front fender skin was always pulling away from the fender and looking unsightly. The factory fastener was a little defective and I didnt want to order another as fear it would not completely fix the problem.
I remover the fastened,, for ease of work, and glued a 2x2x1 wood block unto the windshield washer tank. After drying,, I simply used a wood screw through the skin into the block of wood. a dab of black paint and its finally fixed. This is a 30 min or less project with zero cost.
I remover the fastened,, for ease of work, and glued a 2x2x1 wood block unto the windshield washer tank. After drying,, I simply used a wood screw through the skin into the block of wood. a dab of black paint and its finally fixed. This is a 30 min or less project with zero cost.
The following users liked this post:
Amadauss (05-25-2014)
#2
The following users liked this post:
Jumpin' Jag Flash (05-27-2014)
Thread
Thread Starter
Forum
Replies
Last Post
Fraser Mitchell
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
9
10-01-2015 04:06 AM
stanjag
S-Type / S type R Supercharged V8 ( X200 )
2
08-30-2015 10:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)