XK / XKR ( X150 ) 2006 - 2014

side skirt swap help

Thread Tools
 
Search this Thread
 
Old Jan 22, 2017 | 06:10 AM
  #1  
Mr_Nico's Avatar
Thread Starter
|
Member
Joined: Aug 2016
Posts: 87
Likes: 10
From: Nottingham UK
Default side skirt swap help

does anyone know how to swap off the standard skirts from the xkr, all I can find is a short comment on 7 or so centre pin clips but the part I cant be sure on is the rubber seal and sills as they continue up the edge of the car so i assume they have to come out first...

any help would be great as I dont want to mess up the clips by doinng something in the wrong order...

cheers
 
Reply
Old Jan 22, 2017 | 08:29 AM
  #2  
Snide72's Avatar
Senior Member
Joined: Nov 2012
Posts: 382
Likes: 190
From: Columbus (Gahanna) Ohio 43230
Default

For those of us that speak 'that other English' please explain what a 'side skirt' is. Thx.
 
Reply
Old Jan 22, 2017 | 08:34 AM
  #3  
kj07xk's Avatar
Veteran Member
10 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2015
Posts: 5,301
Likes: 2,570
From: Naperville, Illinois USA
Default

My guess would be 'rocker panel'.
 
Reply
Old Jan 22, 2017 | 10:21 AM
  #4  
tberg's Avatar
Veteran Member
10 Year Member
Liked
Loved
Community Favorite
Joined: Apr 2011
Posts: 5,008
Likes: 2,622
From: Los Angeles
Default

Mr.Nico,
I seem to remember that the side skirts (at least the ones I got from Mina Galleries) bolt on directly to the existing rockers. And these skirts appear to look like those of the XKR175, Are these the skirts you're thinking of adding?
 
Attached Thumbnails side skirt swap help-dscf1356.jpg   side skirt swap help-dscf1363.jpg   side skirt swap help-dscf1359.jpg  
Reply
Old Jan 22, 2017 | 11:25 AM
  #5  
Mr_Nico's Avatar
Thread Starter
|
Member
Joined: Aug 2016
Posts: 87
Likes: 10
From: Nottingham UK
Default

Sorry... forgot they have "alternate names" I tend to only think of them as Rocker panels in 4x4's!

to give a little more info... I have the standard XK150 and purchased the limited edition XK60 side skirts, they are replacement panels rather than bolt on and more or less just an exaggeration of the factory sills (side skirts/ rocker panels) you can see them in these images (that another member posted although mine is the face lifted pre-2012 version so my front and rear bumpers (fenders?) are different)








this is a link to a forum comment on piston heads where someone (@ Paragon) had swapped them.

and this is a link to a forum post I found with the previously mentioned instructions

however when you open the door and look at them the sill protector sits on top of the outer edge of the rocker panel and rubber trim/ seal runs through the lip of it into the main body work of the car. I've pulled a bit of the rubber and found its also held in with plastic clips but just wondered if anyone had done the swap and had additional info on the order of things... its one of those jobs I'm happy to do but would be good if I knew about potential "gotcha's" in advance!
 
Reply
Old Jan 22, 2017 | 05:44 PM
  #6  
u102768's Avatar
Veteran Member
Joined: Jan 2010
Posts: 2,941
Likes: 1,511
From: New Zealand
Default

Did you get the attached not very clear fitting instructions with the side skirts?
 
Attached Files
File Type: pdf
side_skirt_c2p8122_c2p8123.pdf (1.55 MB, 356 views)
Reply
Old Jan 23, 2017 | 05:51 AM
  #7  
Mr_Nico's Avatar
Thread Starter
|
Member
Joined: Aug 2016
Posts: 87
Likes: 10
From: Nottingham UK
Default

Originally Posted by u102768
Did you get the attached not very clear fitting instructions with the side skirts?

I didnt get the instructions but thanks for sending them over they are perfect! from the initial playing about and investigating I can follow them in the right order. Once I find time to sort it I'll post about my success or faliure...

cheers!
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:48 AM.