When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Mine & the PO's JB Wet Weld/2 part epoxy fixes have finally ran their course. I need the upper belt trim that attaches to the high part of the rear seat in SDZ/Cashmere.
Thanks !
Last edited by King Charles; Apr 4, 2017 at 02:39 PM.
Color match ? If not spray with latex paint only and in mixing color it will change as it dries so you would have to spray sample items a couple of tries . Latex washes off with water so on the final on final part spray it washes off with water if it runs . Surface prep is important as there is probably a oily film on it . soap and water and a toothbrush as a solvent beyond rubbing alcohol may desolve textured surface .
Will be doing it to my X300 different shaped parts later like the sun damaged seat belt tongue plastic after cleaning the fabric / strap
Last edited by Lady Penelope; Dec 25, 2017 at 11:22 PM.
I now need #3 lol ?! Found it easily this round on eBay. My back seats get minimal traffic, but every time I touch something back there it perishes lol.
Last edited by King Charles; Dec 7, 2018 at 07:18 AM.
Searching for rear seat belt trim,
