Fuel line sizes
Thread Starter
|
Banned
Joined: Aug 2013
Posts: 832
Likes: 325
Fuel line sizes
I am sure someone has replaced the fuel lines for the fuel tank, does anyone remember the sizes. I want to do mine and would like to have them so I have them on hand.
Thanks ahead of time
Dave
Thanks ahead of time
Dave
Joined: Feb 2010
Posts: 28,773
Likes: 11,260
From: Adelaide Stralia
Memory.
The large from the main tank to teh sump tank is 1/2" (12.5mm)
The large from the sump tank to the pump inlet is the same size.
The high pressure from the pump to the elbow in the floor is 5/16" (7.5-8.0mm).
The return in the LH corner is 10mm.
The others floating around are 8mm.
The 2 on top of the cradle, outside the boot, are 8mm, and should be included, coz many a fuel smell in an XJ-S is traced eventually to those 2 suckers.
The vent hoses at the top RH corner and up into the buttress, NO idea, I removed them and did away with that stuff, and vented the tank to the outside.
All those hoses except the HIGH pressure hose are standard fuel rated hose, BUT, I use EFI spec on all of them except the 1/2" gravity hoses, where I use standard fuel rated hose.
The large from the main tank to teh sump tank is 1/2" (12.5mm)
The large from the sump tank to the pump inlet is the same size.
The high pressure from the pump to the elbow in the floor is 5/16" (7.5-8.0mm).
The return in the LH corner is 10mm.
The others floating around are 8mm.
The 2 on top of the cradle, outside the boot, are 8mm, and should be included, coz many a fuel smell in an XJ-S is traced eventually to those 2 suckers.
The vent hoses at the top RH corner and up into the buttress, NO idea, I removed them and did away with that stuff, and vented the tank to the outside.
All those hoses except the HIGH pressure hose are standard fuel rated hose, BUT, I use EFI spec on all of them except the 1/2" gravity hoses, where I use standard fuel rated hose.
Thread Starter
|
Banned
Joined: Aug 2013
Posts: 832
Likes: 325
Memory.
The large from the main tank to teh sump tank is 1/2" (12.5mm)
The large from the sump tank to the pump inlet is the same size.
The high pressure from the pump to the elbow in the floor is 5/16" (7.5-8.0mm).
The return in the LH corner is 10mm.
The others floating around are 8mm.
The 2 on top of the cradle, outside the boot, are 8mm, and should be included, coz many a fuel smell in an XJ-S is traced eventually to those 2 suckers.
The vent hoses at the top RH corner and up into the buttress, NO idea, I removed them and did away with that stuff, and vented the tank to the outside.
All those hoses except the HIGH pressure hose are standard fuel rated hose, BUT, I use EFI spec on all of them except the 1/2" gravity hoses, where I use standard fuel rated hose.
The large from the main tank to teh sump tank is 1/2" (12.5mm)
The large from the sump tank to the pump inlet is the same size.
The high pressure from the pump to the elbow in the floor is 5/16" (7.5-8.0mm).
The return in the LH corner is 10mm.
The others floating around are 8mm.
The 2 on top of the cradle, outside the boot, are 8mm, and should be included, coz many a fuel smell in an XJ-S is traced eventually to those 2 suckers.
The vent hoses at the top RH corner and up into the buttress, NO idea, I removed them and did away with that stuff, and vented the tank to the outside.
All those hoses except the HIGH pressure hose are standard fuel rated hose, BUT, I use EFI spec on all of them except the 1/2" gravity hoses, where I use standard fuel rated hose.
Junior Member
Joined: Jun 2022
Posts: 12
Likes: 0
From: chicago
Bumping up a older thread
Thread
Thread Starter
Forum
Replies
Last Post
Matt300ZXT
XJ6 & XJ12 Series I, II & III
11
Oct 21, 2012 11:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)