rear door lock
Yes got a good one in there now. The boot has not really been shutting properly adjusted the striker got a firm close now and boot ajar light is off. Could have been the boot light running down the battery.
The linkage tends to fall out of adjustment or the threads in plastic connectors strip or the connectors break.
Another common problem is that the plastic trim along the top of the interior door panel warps over the years and causes binding between the door lock button or plunger and its chromed plastic ferrule. You may be able to tell if the ferrule does not sit squarely around the button or plunger. If it fits around the button at an angle, it may be part of your problem. If I recall correctly, to remove the ferrule without breaking it, the interior door panel must be removed so the lock button can be pulled out of the ferrule before you push the ferrule up and out of the door trim.
Cheers,
Don
Last edited by Don B; Nov 8, 2020 at 09:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)










