OK guys so my door handle broke and ive been in the process of replacing, but most of my door clips are broke along with the clip holders on the inside of the door. I was wandering where i could get all new clips, i havent found any in my local area. Also, what do i do if the clip fastener is broken? havent really came up with much

 

Let me see if I can find the part number; the plastic one has been replaced with a new design.


Edited: actually, there is a sleeve that goes over the existing latch.


https://www.jaguarforums.com/forum/x...oor-faq-48827/

 

hmmm, maybe we are talking about something different. im needing to attach the door panel to the actual door. sadly, most of the clips are gone and the clip mounts are gone as well. so im a little lost on what to do.

 

Try this thread on our X Type forum:

https://www.jaguarforums.com/forum/x...d-clips-78852/

Has a great discussion on the clips/types/colors/etc.

 

thanks, i got the part numbers for the fasteners. Now i just need to figure out what to do about the broken brackets.

 

That stinks - looking at the photos/drawings from others, brackets that are on the panels may not be replaceable (aka an integral part of the panel itself.) I will be following your thread as I think I may also have broken brackets on my front two panels (have not pulled them to evaluate the total damage yet....)

Here is another forum thread that discusses repairing the brackets with a hot glue gun.....

https://www.jaguarforums.com/forum/x...29/#post132944

Good Luck!!