X-Type ( X400 ) 2001 - 2009
Sponsored by:
Sponsored by:

Air inlet hose clamp part number?

Thread Tools
 
Search this Thread
 
  #1  
Old 11-23-2016, 02:55 PM
Rogelio Serrano's Avatar
Member
Thread Starter
Join Date: Sep 2016
Location: Douglas
Posts: 97
Received 5 Likes on 5 Posts
Default Air inlet hose clamp part number?

 
  #2  
Old 11-23-2016, 04:11 PM
avern1's Avatar
Veteran Member
Join Date: May 2012
Location: Winchester, CA
Posts: 3,290
Received 1,317 Likes on 1,004 Posts
Default

If you click on the link for SNG Barratt you can download the parts catalog for the X-Type. Them and Jagbits are are forum sponsors and are a good source for parts.
The part number for the calmps is:
Aircleaner Hose to
Aircleaner Fixing Clamp C2S11219
 
The following users liked this post:
Rogelio Serrano (11-25-2016)
  #3  
Old 11-24-2016, 09:53 AM
dwclapp's Avatar
Senior Member
Join Date: Oct 2007
Location: Houston, TX
Posts: 809
Received 286 Likes on 234 Posts
Default

Rogelio: The official Jaguar part C2S11219 is $20+, but if your budget is tight, any $1-2 large hose clamp works, like this example: Everbilt 2-3/4 in. Stainless-Steel Clamp-6736595 - The Home Depot

In a pinch, some folks use nylon zip ties until they can get a metal hose clamp.

The Jaguar EPC - Electronic Parts Catalogue is very helpful for part numbers and diagrams. Download it a copy from here (1st link): https://www.jaguarforums.com/forum/x...essories-5915/
 
The following users liked this post:
Rogelio Serrano (11-25-2016)
  #4  
Old 11-25-2016, 09:33 AM
Rogelio Serrano's Avatar
Member
Thread Starter
Join Date: Sep 2016
Location: Douglas
Posts: 97
Received 5 Likes on 5 Posts
Default

Originally Posted by dwclapp
Rogelio: The official Jaguar part C2S11219 is $20+, but if your budget is tight, any $1-2 large hose clamp works, like this example: Everbilt 2-3/4 in. Stainless-Steel Clamp-6736595 - The Home Depot

In a pinch, some folks use nylon zip ties until they can get a metal hose clamp.

The Jaguar EPC - Electronic Parts Catalogue is very helpful for part numbers and diagrams. Download it a copy from here (1st link): https://www.jaguarforums.com/forum/x...essories-5915/
My current clamp seems marginal but yeah that would do just fine just in case. I have a pile of those in assorted sizes and when I replace my radiator I will replace the badly rusted spring clips on the coolant hoses.
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:57 AM.