Hi Folks, New here and wondered if anyone has a comprehensive list of sensor in the X-Type Diesel 2.2,2007 without DPF

Engine light stays on all of the time professional diagnostics shows no error codes. I thought it may be the 5v reference causing the EML issue car drives fine.

 

Click over to jagrepair and then click on your 2007 model year. That will give you a PDF of the electrical guide. A list of electrical components is on the page numbered 5 (which is page 9 of the PDF). Diagram of the engine management for sensors is in Figures 3.5 and 3.6.

 

Cheers DH53

Many thanks for that. This one has me confused. EGR has been blanked and deleted, remapping done and the engine light stays on.

Had P10000 code but pretty sure the drive cycles have all been completed.Will check for P1111 code at the end of the week to confirm that.

Not sure if the Blanking is causing the EML to stay on

Hay Ho

 

Hi folks,

Is there a wiring diagram that shows the 5v reference wiring and the Pin out from the ECU

I don’t seem to be able to find it Trying to chemical there is a drop in voltage as EML is staying on constantly

Any help appreciated

 

Jaguar electrical guide attached.

 

Whoops

Trying to trace if there is a drop in voltage on the 5v reference as EML is staying on constantly (I meant)

 

Cheers DELL Gailey many thanks for that