My 2008 XF keep going into reduced power when a warning comes on dashboard say DSC not available ,it is proofing hard to find fault as when you turn off engine the fault clears and may not come back for a couple of days our even weeks our just a couple of miles down the road.any body any ideas ,,thanks

 

Welcome to the forums Bracken,

I answered your first post but have no idea if you even read it as there was no response or acknowledgement.
https://www.jaguarforums.com/forum/g...r-vent-226509/

I've moved this question from General Tech Help to X250 forum. This is the place to post technical questions about your model.

Graham

 

Quickest way is to read the codes in the ABS module.

Otherwise it could be low power, failing bearing, rusty "tone ring", ABS dirty sensor, faulty module or something else I've overlooked.

 

thanks for the info, I have read the codes but nothing registers so I guess that means working my way round the wheels and such to find the problem..Thanks again Michael.

 

You sound like you've read the codes ONLY from the PCM - but there are about a dozen other modules, ABS being one.