Hi all

I am trying to retrofit a heated steering wheel to my XF.

I have used SDD and have changed the value from not fitted to fitted.

How do I get SDD to save the modified CCF to the car?

Any advise is appreciated.

Regards

 

Can you show a screenshot of where you're changing it? I've done that retrofit and it is just the 1 setting that needs to be changed.

 

if you can change the selection , then look to the right, there should be a ' green tick ' press this and follow instructions,






BB

 

Thanks Guys

I connected back to the car again just to take some screen shots, I am sure I did exactly what I did before as brake buster illustrated but this time the button appeared - so it’s a result 😂

but just want to thank you both for your help 👍

 

Brake buster - I see you're using VMware fusion on a Mac laptop. It must be working well enough for you to snap these pics, but have you had any issues with your setup? I'm asking because I was about to go out and purchase a Windows laptop solely for the purpose of SDD, but if I can use a Mac instead, I'd be much happier.

 

sorry , library picture, too much info about my car on my own screen shots, lol

also run a windows based laptop anyway,

i have heard that the Mac setup is stable though

BB