Seatbelt plastic "rivet"
#1
Seatbelt plastic "rivet"
So I have acquired an 2016 XJL Portfolio that needs a little bit of TLC. One of the things missing is this part that keeps the seatbelt buckle at a reasonable height to grab.
seatbelt plastic rivet
This has to be a 25c part, perhaps 50c. The bodyshop tell me that Jaguar will not sell this part on its own and to replace this, I need to replace the seatbelt, the seatbelt mechanism, 3 airbags, and then have it all turned on at the dealer at the bargain cost of roughly $1,000/$1,200. Nuts... I get it's part of a safety system, but some kid with nothing better to do has popped it off and eaten it... There is nothing wrong with the belt or anything else (except perhaps the offending kid).
Now to my question: does anyone know where I can find one of these widgets? Or does anyone have one kicking about?
Thanks,
cjp
seatbelt plastic rivet
This has to be a 25c part, perhaps 50c. The bodyshop tell me that Jaguar will not sell this part on its own and to replace this, I need to replace the seatbelt, the seatbelt mechanism, 3 airbags, and then have it all turned on at the dealer at the bargain cost of roughly $1,000/$1,200. Nuts... I get it's part of a safety system, but some kid with nothing better to do has popped it off and eaten it... There is nothing wrong with the belt or anything else (except perhaps the offending kid).
Now to my question: does anyone know where I can find one of these widgets? Or does anyone have one kicking about?
Thanks,
cjp
#2
Join Date: Feb 2014
Location: Adelaide, South Australia
Posts: 8,290
Received 3,113 Likes
on
2,296 Posts
I bought a pair of these for my XFR years ago, on Fleabay, cost a whopping $1.00 IIRC.
Not Jag specific but generic, no biggie.
Search Fleabay and ye shall find.
Edit - here's 10 of 'em for $1: https://www.ebay.com/itm/10pcs-Car-S...8AAOSw9~RcJykE
You will need some way to melt the prong closed, I used an el cheapo soldering iron which worked a charm.
Not Jag specific but generic, no biggie.
Search Fleabay and ye shall find.
Edit - here's 10 of 'em for $1: https://www.ebay.com/itm/10pcs-Car-S...8AAOSw9~RcJykE
You will need some way to melt the prong closed, I used an el cheapo soldering iron which worked a charm.
Last edited by OzXFR; 06-10-2019 at 09:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jeff71
XJS ( X27 )
4
02-03-2016 07:41 AM
Sarc
XJ40 ( XJ81 )
3
05-14-2015 04:16 PM
Warspite
S-Type / S type R Supercharged V8 ( X200 )
6
04-07-2015 07:59 PM
slmskrs
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
8
12-02-2013 04:11 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)