Hi All,
Not sure if this is the right place?

I've bought a JLR VCM from a guy who cleared out an old Land Rover Dealer,
Are there any how to guides on setting it up... (I've done a quick search and can't find anything)

The only things I have are the
Red VCM unit,
USB to VCM
Diag cable to VCM
I also have IDS DVD 119
When I plug it into my laptop it comes up as usb network 10/100 but unable to find any drivers

Thanks

Search for "Best X350 Scanner" and work your way through it. Post#34 has the best advice you can get----follow it and all will be well

You need to look for and study "SDD".
.
.
.

Thanks for the replies, I dug out an old windows xp and installed the DVD and its seems to detect the VCM etc. Just need to try it on the car