Unusually Large Center Bore......

Subscribe
Apr 9, 2008 | 10:07 AM
  #1  
I've been looking at wheels for my 2004 xj8. I thought dimensions up to the following would fit:
Offset 37 to 47
wheels up to 21x9.5
tires up to 711x255mm

I found a set of Antera wheels (correct bolt pattern):
Offset 45
wheels - 19x8.5J
tires 245/35-19 that would bring my dimensions to 645x245mm

With that, the seller said they would fit the x-type and s-type, but not the xj8 because of a unusually large center bore and offset. Is there an interferance in the back space, or is this a specific brand issue?
Reply 0
Apr 9, 2008 | 07:20 PM
  #2  
RE: Unusually Large Center Bore......
X-Type and 2004 XJ should have same hub dimensions.
Reply 0
Apr 10, 2008 | 08:19 AM
  #3  
RE: Unusually Large Center Bore......
I'm starting to think the seller is mistakenly thinking that I'm talking about the pre-2004 xj8. Did they have substantially different hub dimensions? Thanks for the response FactJag.
Reply 0
Apr 10, 2008 | 07:33 PM
  #4  
RE: Unusually Large Center Bore......
Yes....98-2003 XJ and 97-2006 XK had same hubs...but different from their 2004+ XJ and 2007+ XK.

Reply 0
Apr 11, 2008 | 08:12 AM
  #5  
RE: Unusually Large Center Bore......
Alright, finally got the seller to check his facts and he was mistaken. So, they will work. I was starting to think I was losing it.

Now that I have it all straightened out, I'm not sure how much I like the wheels.

Thanks again for your input FactJag.
Reply 0
Apr 11, 2008 | 07:52 PM
  #6  
RE: Unusually Large Center Bore......
LOL....no problem.
If you are not sure about the wheels....don't get them. Imulse buy for the car is always bad.
Reply 0
Subscribe
Currently Active Users (1)