Have been looking at the electrical diag showing the Rotart Switch it shows two wires one R/O feeding on to the switch and G/O on the outlet side feeding the starter relay. I cannot find these wires in the car does anyone here know where they are locted..

Thanks

 

r/o come out from bcm (behind clove box)
g/o from switch to relay (starter relay is in the left front engine bay, between headlights and air filter box)
rotary switch on the transmission shifter handle
What you trying to do?

 

Hi Pan84 I was looking at the electrical Diag for the starting system becouse know matter what I do I don;t seem able to adjust the rotory switch so the car will starts in the park position I have to pull the gear shift to the left and down before it works, so I thought if I bypass the rotor switch by installing a wire between the red/Orange and Green/Orange I can prove it;s the switch thats bad or not ajusted right. So I took out the ski hill and looked for the Red/Orange wire (I had found the G/O on the starter relay) but for the life of me I cannot see the R/O wire..