XJ308 to XJ350 HUB CONVERSION
Thread Starter
|
Member
Joined: May 2019
Posts: 80
Likes: 15
From: Hertfordshire, England
XJ308 to XJ350 HUB CONVERSION
Hi, hope this is not a daft question...…
can the X308 hubs (120.65mm PCD) front and rear be converted to the later Ford Hubs (108mmPCD) from the X350, (not adapter plates though !)
or does anybody know where you could buy blank hubs for front and rear and drill/broach your own spline-studs in.
Anybody got any links to manufacturers who make these aftermarket hubs, who would make them to suit the 108mm PCD config.
thanks
can the X308 hubs (120.65mm PCD) front and rear be converted to the later Ford Hubs (108mmPCD) from the X350, (not adapter plates though !)
or does anybody know where you could buy blank hubs for front and rear and drill/broach your own spline-studs in.
Anybody got any links to manufacturers who make these aftermarket hubs, who would make them to suit the 108mm PCD config.
thanks
Last edited by Jagger98; Nov 27, 2019 at 07:13 AM.
Veteran Member
Joined: Feb 2013
Posts: 4,938
Likes: 1,932
From: Trying to escape Central Florida
Initially I thought to check the bearing ID and hub OD for fitment. But, the models are way different from offsets, design and ride heights have all been reconfigured.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
