Parking brake cable - pivot bolt
#1
Parking brake cable - pivot bolt
Hello,
Been working on my 87 XJ6, looks like it ran over something that scraped the bottom on the driver side. The pivot bolt (for the bellcrank that works the parking brake cable) under the driver floorpan was bent from the impact. It also appears that there was something riveted on in this area, but all that is left are the rivets.
Was there a guard plate or something to cover the cable and linkage in this area under the floorpan? If anyone could post a picture, that would help.
Thanks everyone!
Brian
Been working on my 87 XJ6, looks like it ran over something that scraped the bottom on the driver side. The pivot bolt (for the bellcrank that works the parking brake cable) under the driver floorpan was bent from the impact. It also appears that there was something riveted on in this area, but all that is left are the rivets.
Was there a guard plate or something to cover the cable and linkage in this area under the floorpan? If anyone could post a picture, that would help.
Thanks everyone!
Brian
#2
Join Date: Mar 2008
Location: Pacific Northwest USA
Posts: 24,739
Received 10,749 Likes
on
7,100 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Rlover
XJ XJ8 / XJR ( X308 )
10
03-30-2016 10:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)