can anyone tell me how to do this. managed to get 3 of the 4 bolts out for the motor itself, but the last is behind the one of the tops hydraulic pistons, and i'm told I have to maybe take out this box behind the seats to get down low enough to do something as well. if so where are all the bolts for that. I see a few at the bottom of the front panel, but where are the ones for the two sides. again, if that's even necessary to take out the box.

 

If yours is similar to mine, you may have to put the top halfway up to gain access to that bolt.

Or maybe it was the quarter glass windows had to be halfway up...

 

yeah I tried putting up the top some, I think you just about have to remove that piston at the top or something.